D3D v19.02
Jump to navigation
Jump to search
Working Doc
Part Library
![Stock Titan Aero mount bracket. See [1]. Bracket - [2] - STEP + STL. Check out drawings from E3D - [3]. STEP of Bracket - File:Bracket.fcstd](/images/thumb/5/51/Titanstockholder.jpg/120px-Titanstockholder.jpg)
Stock Titan Aero mount bracket. See [1]. Bracket - [2] - STEP + STL. Check out drawings from E3D - [3]. STEP of Bracket - File:Bracket.fcstd
![Titan Aero with motor - [4]](/images/thumb/7/78/Titanwithmotor.png/120px-Titanwithmotor.png)
Titan Aero with motor - [4]
Titan Aero mount top plate. File:Brackettop.fcstd.
Simplified carriage: File:Universal axis carriage side.fcstd. (From D3D Part Library)
![Stock Titan Aero mount bracket. See [1]. Bracket - [2] - STEP + STL. Check out drawings from E3D - [3]. STEP of Bracket - File:Bracket.fcstd](/wiki/File:Titanstockholder.jpg)
![Titan Aero with motor - [4]](/wiki/File:Titanwithmotor.png)
- Titan Aero with Volcano
- Carriage
- Rods
- Titan Aero Bracket
- Print Cooling Fan
- Print Cooling Fan Holde
- Height Sensor, 8 mm sensing distance
- Height Sensor Holder
- Fan duct
- Screws for mounting Titan Aero Bracket
- Cable Chain
- Stepper Wire. Use Flamingo Workbench to create wires as pipes.
Change Log
- Main change - Titan Aero with Volcano heater block.
- Develop auto-parallel of two Y axes
- Determine if 24V has visible performance improvement.
- Does the Volcano heater block use the same heater as the standard E3D version? Docs - [5]. Yes:
- Heater sourcing - [6]
