3D Printer Shipping Followup
Hello _______________,
Just shipped your order. Please see tracking number - __________________________.
https://photos.google.com/photo/AF1QipOlMeD4fZtob4Fu7xVPoS1jre9d4hKRcZTTwtpA
Once you receive your order, please inventory and let me know if anything is missing. The packing list is shown at _________________________________.
https://photos.google.com/photo/AF1QipOqI0rawcxr3azO-t-tpNw6f5k0OblbtFTLp9RF
More information is found at https://wiki.opensourceecology.org/wiki/D3D_Pro.
Some notes:
We printed this with large nozzles - 1.2 mm - so you will see that the prints are more 'brute force' and messy than 0.4 mm prints. But we favor stronger parts over better looks. Cleaning up prints with a knife or melting imperfections off with a heat guy may be useful.
You'll find your packages in 8 units a in https://photos.google.com/photo/AF1QipPq98T-h_ZZhir5AU_yaUT6UPHiV_o_sIT8Egik ,all shipped in recycled packaging :
Bed Rods Frame Stepper Motors Controller Extruder Hardware Bag of All Goods Printed Parts
Special notes: ___________________________________.
Note that ___________________________________________ https://wiki.opensourceecology.org/wiki/File:Carriage_motor_merge.stl is missing.
Also note that the nozzle that I have sent is 1.0 mm, not 1.2 mm, because we were out of stock. Would you like me to send you a 1.2 mm nozzle once it's back in stock, or are you ok with the 1 mm nozzle?
Quality Control:
All parts have been verified. The controller and all electronics are in full working order. The extruder pull strength data point is 5.5 lb for the pull on 3 mm filament.
Missing Parts:
Going through the packing list, I noticed that I missed _______________________.
https://wiki.opensourceecology.org/wiki/File:Carriage_motor_merge.stl - one part. Should I just drop it in the mail, or do you have means to print one out?
Once you inventory your parts and are ready to build, let me know and we can set up a call on collaborative literacy or to get you started on the build.
Marcin