Simplified_motor_side.fcstd ‎(file size: 374 KB, MIME type: application/zip)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Notes

This started as the full length motor piece, then was cut down for 3 screw holes on stepper motor. This allows easy mount of Z axis.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	05:16, 24 June 2021	(374 KB)	Marcin (talk \| contribs)
	00:39, 1 August 2020	(389 KB)	Marcin (talk \| contribs)
	19:46, 30 July 2020	(315 KB)	Marcin (talk \| contribs)	Dumbed Down full motor file
	01:22, 22 July 2020	(9 KB)	Marcin (talk \| contribs)	Stripped and dumbed down for modeling purposes. Front is accurate.
	01:19, 22 July 2020	(20 KB)	Marcin (talk \| contribs)	Dumb version for modeling purposes.
	00:57, 22 July 2020	(491 KB)	Marcin (talk \| contribs)	Moved bottom set screw hole locations.
	02:34, 9 July 2020	(110 KB)	Marcin (talk \| contribs)	Simplified, dumb file (no sketches)
	02:31, 9 July 2020	(328 KB)	Marcin (talk \| contribs)	Symmetric set screw location, correction of the simplified file made from scratch.
	02:23, 9 July 2020	(360 KB)	Marcin (talk \| contribs)	Proper naming.
	02:16, 9 July 2020	(360 KB)	Marcin (talk \| contribs)	With rounded edges.

You cannot overwrite this file.

The following file is a duplicate of this file (more details):

The following 5 pages use this file: