Hot Dip Galvanizing
Jump to navigation
Jump to search
Howto
- Sand blast
- Base bath - 10 minutes min
- Base bath - 7 minutes min
- Flux - ammonium
- Actual dip - 3.5 minutes (until base metal reaches melt temp of 835F)
- Water - trapped water explodes, and is dangerous, so first dip is dangerous and venting must be assured.
- Zinc - 2400 lb blocks are the feedstock for hot dip baths. This is only 0.1 cubic meter - or 4 cubic feet.
https://www.aisc.org/globalassets/modern-steel/archives/2014/08/2014v08_galvanizing.pdf
More about surface preparation: [1]
Sourcing
- Acid -
- Base - KOH pr NaOH for grease - [2], NaOH doesn't require hot water.
- Ammonium chloride - $2/lb [3]
Zinc Ingots
See Zinc#Sourcing
- [4]
- Carter Alloys, 2" zinc balls [5]
- ACI - [6]
- Ney - [7]
- Industrial Metal Supply - [8]. Do they have ingot?
- Victory - [9]
- Milward - [10]
- Umicore - [11]
- Belmont Brooklyn - [12]
- AEM says zinc - [13]
- Ingots on Thomas Register - [14]
- Zinc Ingot on Thomas Register - [15]
- Zinc on Thomas Register - [16]