Steam Engine Bill of Materials
Jump to navigation
Jump to search
Main > Energy > Steam Engine
| Steam Engine | ||
|---|---|---|
| Home | Research & Development | Bill of Materials | Manufacturing Instructions | User's Manual | User Reviews | 
| |
Bump Valve Engine Design (Steam Engine Design)
| QTY | Description | Price | Location |
|---|---|---|---|
| 1 | Cylinder Liner, 4" Bore, 4.25" O.D., Cast Iron, 6" long (no. 2001SB) | 79.23 | [1] |
| 1 | Cylinder, 4.25 I.D, 4.75" O.D., Cast Iron, 6" long | ||
| 2 | Cylinder Flanges, 4.75 I.D, 5.75" O.D., 0.5" thick, Cold rolled steel, 6" long | 197.15 for 16" | [2] |
| 1 | Piston 4" x 5/8" Cold rolled Steel | [3] | |
| 2 | Piston Rings 4" O.D. Cast Iron (no. 844-E251X), 5/64" wide (0.078") | 4.75 ea. | [4] |
| 2 | Piston Bump Pin | ||
| 1 | Connecting rod 5/8"x1"x6" | 9.91 | [5] |
| 1 | Connecting rod bearings | ||
| 1 | Cylinder End Cap w/ Valve Seats | ||
| 2 | Cylinder End Cap Bolts | ||
| 1 | Valve Cover | ||
| 2 | Valve Spring Bolts | ||
| 2 | Valve Springs | 2.87 ea., O.D. is 1.230", I.D. is 0.876", Load: 162lbs at 1.475" | [6] |
| 2 | Bump Valves | ||
| 1 | Water Drain Plug | ||
| 1 | Oil Dribbler | ||
| 2 | Exhaust Plenum |
Crankshaft (Steam Engine Crank)
| QTY | Description | Price | Location |
|---|---|---|---|
| 1 | Shaft 1" | 13.01 | [7] |
| 1 | Flywheel 8"x2.5" Cold Rolled Steel | 74.3 | [8] |
| 1 | Eccentric 4.5" x .5" Cold rolled | 13.95 | [9] |
| 2 | .5" Dia Pin 1.75" Long | 6.29 | [10] |
Other Pieces
| QTY | Description | Price | Location |
|---|---|---|---|
| 6' Sch 80 Steam Pipe | 43.7 | [11] | |
| 1 | Baseplate TBD | ||
| 1 | Crankshaft Enclosure |
TOTAL = ???
Alternatively Cast Iron Cylinder Material can be found http://www.mcmaster.com/#8929k18/=gnvh3 for 41.47 per cylinder
See also Steam Engine Bill of Materials/2009.