A-Z Instructionals

THIS PAGE IS FOR THE CEB PRESS

CEB instructionals to be transfered to Make Projects
CEB instructionals CAD Requests

Fabrication

Note: All make pages need a BOM for steps.

Structural Components

1. Simple Plates
2. Frame structural support components-Still needs fab drawings

Soil Loading System

Shaker

3. Shaker Mount-Still needs fab drawings
4. Shaker Hammer and Shaft-Still needs fab drawings, model
5. Shaker Hydraulics

Hopper and Grate

6. Hopper and Grate Supports
7. Hopper Sheet Metal-Still needs fab drawings
8. Hopper Mounting plate
9. Grate-Still needs fab drawings

Machine Core

10. Soil Loading Drawer
11. Roller Guides

Main Frame

Main Frame Preparation

12. Wide Cylinder Supports
13. Main Frame Small Components
14. Main Frame U-Channel Prep-Still needs fab drawings

Main Cylinder Preparation

15. Make the Press Feet
16. Prepare the main cylinder

Main Frame Assembly

17. Assemble U Channel-needs model
18. Fit the Main Cylinder-needs model
19. Stretch the frame
20. Weld the spacers
21. Install Small Components
22. Fit the Drawer Members

Still need to be added in MAKE:

• Soil Shaker motor unit-
• Hoses - Secondary cylinder hose unit

Assembly

Before beginning assembly, insure you have finished all of the components listed above in the fabrication step.

1. Assemble the structural components
2. Assemble the Soil Loading System
3. Shaker Assembly -Still needs fab drawings, model
4. Adjust the Drawer
5. Install the secondary cylinder
6. Hard-line the main cylinder

Programming

An Arduino is the microprocessor that controls the CEB Press's actions. It must be programmed with the CEB Press's unique program for making bricks.

Source code can be found at github: https://github.com/OSE/ceb-controller

Old code:

• CEB Control Source Code v1.01 Annotated
• CEB Control Source Code v1.01
• CEB Control Source Code v1.0

• Control Code Site