LifeCat 1.0/Research Development/Features/nl

From Open Source Ecology
< LifeCat 1.0‎ | Research Development‎ | Features
Revision as of 16:31, 29 February 2012 by Joosttricht (talk | contribs) (Created page with "==Overview== List of desired features that should try to be worked into the design of the LifeCat ==Safety Features== * Veiligheidsgordek * Structurally sound occupant enclosure...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Overview

List of desired features that should try to be worked into the design of the LifeCat

Safety Features

  • Veiligheidsgordek
  • Structurally sound occupant enclosure
  • Screen/glass/clear plastic on sides to ensure limbs cannot get caught in lift arms
  • 360deg field of view
  • Handrem - hydraulisch geinactiveerd - geen idee hoe dit te doen
  • Roll over Protection (ROPS)

Design Features

  • Bob-Tac Quick Attach - Universal Quick Attach Plate
  • Auxiliary hydraulics at lifter arm bend on left side
  • Protected hose routing
  • Quick couplers
  • Maximum reach at flatbed truck height ~ 60"
  • Headlights mounting location
  • Dome light
  • Design for counterweight location
  • Cab forward location
  • Bekerhouder - iedereen houdt van bekerhouders!
  • Verstelbare Stoel - onvermijdelijk

Aandrijving

  • One hydraulic motor for each side, chain drive to wheels
    • Bobcat S630 is using 120 High Strength Chain while other models use 80 HSC
  • Chain case
  • Wheel mounting that transfers non-rotational load to frame, not axle
  • Here is a good movie about the skid steering mechanism [[1]]

Frame

  • Tie down locations for transport
  • Bolt together base frame
    • Niet zeker of het daadwerkelijk haalbaar is en behoud van alle nodige afstemmingen en sterkte
Retrieved from "https://wiki.opensourceecology.org/index.php?title=LifeCat_1.0/Research_Development/Features/nl&oldid=55572"