D3D CNC Circuit Mill

From Open Source Ecology
(Redirected from CNC Circuit Mill Genealogy)
Jump to: navigation, search

Basics

Genealogy

  • The CNC circuit mill took another turn in 2019 with the Open Source Microfactory STEAM Camp, where we built the D3D Universal 3D printer with a hole-drilling capacity for circuit boards.
  • D3D CNC Circuit Mill - built in 2018 with the Universal Axis.
  • We also built HydraFabber in 2014 - which used a low cost spindle. See John Log for pictures of the mill. This is prior to the Universal Axis, which was introduced in 2016. The spindle was built and run, but we did not mill any boards.
  • Yoonseo Kang built a circuit mill while at OSE in 2012. See Yoonseo Log - as a power user, Yoonseo developed a lot of useful proofs of concept, such as the Cold Saw and Tooling Plate, among others. Specifically - v1 was built, and v2 was not. These were pre-Universal Axis.

3D Model

  • You can rotate, zoom, and explode:



HintLightbulb.png Hint: July 2018 - OSE Germany is working on a version of their MPPT Solar Charge Controller which can be milled with the OSE D3D CNC Circuit Mill - https://github.com/LibreSolar/MPPT-Charger_20A/issues/28


Publication

Published in Inventions, http://mdpi.com/2411-5134/3/3/64

Preprint - https://www.preprints.org/manuscript/201808.0233/v1

Build Instructions

  • Drill frame
  • Do Cut List below - rods, belt
  • Cut bed plate
  • Assemble electronics mounting plate
  • Assemble spindle in holder
  • Test electronics - motion
  • Test calibration code
  • Run a milling job

Cut List

(400, 350, and 300 lengths would work)

  • Belt - x - [2] 29"
  • Belt - y - [2] 33"
  • Belt - z - [2] 23"
  • Rods - x - [4] 14"- = 56"
  • Rods - y - [4] 16"- = 64"
  • Rods - z - [4] 11" = 44"
  • Frame if welded from flats - [24] 1/8"x1"x15" flats -
  • Electronics mounting panel - 1/10" plexiglass - 8"x16"

Rods if Using 6' Stock

Try 1

  • If use 6 foot stock- 72" - 4x11=44 + 28 = 72.
  • 4x16 = 64 (8 left over). It's useful to rework design to allow for 8" rod on Z
  • 2x14 = 28 (44 left over)
  • 3 rods needed for 162" = 13.5'

Try 2

  • 4x14 + 16 => perfect.
  • 3x16 + 2x11 = 70 for 2" left over- great.
  • 2x11 = 22 with 50 left over. Nice.

Continuing:

  • 3x16= 2" left over from last one.
  • 4x14 + 16 => perfect
  • 1x16+4x11 = 60 - 12 left over.

Italic text

July 2017

D3dmill.jpgD3dmill2.jpg

Comparison to Industry Standards

Cnccmcomparison.png

Notes: precision is not defined here. If it is positioning accuracy, Othermill appears to be 0.003 (see D3D_CNC_Circuit_Mill#Industry Standards.

BOM

edit

Other Supplies

Single Sided Copper Clad Laminate PCB Circuit Board 4X3 (50pcs) Paramount CCL Link: http://a.co/3YcKSBe

Xuchuan 10Pcs PCB Print Circuit Board Carbide Micro Drill Bits 0.3-1.2mm Xuchuan Link: http://a.co/0KviIvf

JIUWU 1.0mm Tungsten Steel Carbide PCB CNC End Mill Engraving Bits Milling Machine Pack of 10 by JIUWU Link: http://a.co/1CL0H32

You can try these tools out - they are inexpensive and may yield good results for milling traces. But if you run into issues, the tools are likely chipping Autek 10x Titanium Coated Carbide PCB Engraving CNC Bit Router Tool 30 Degree 0.1mm Tip(J3.3001Tix10) by Autek Link: http://a.co/6UR8F9T

Instead it may be good to opt for higher quality milling tools. They should last a good long while:

	Universal Milling Tools
	100% Carbide universal milling tool for milling printed circuit board isolation tracks. V-shaped profile for variable milling width. 1.42" (36 mm) overall length.

https://www.lpkfusa.com/Store/pages/ProductDetail.aspx?cat=11%2f42&cid=42&pid=30

All Industrial Tool Supply TR72020 Dial Indicator (Magnetic Base and Point Precision Inspection Set), 1 Pack by All Industrial Tool Supply Link: http://a.co/5EgkHa0

Software: See this link - it has all of the software we used and then some: http://opencircuitinstitute.org/content/software

Additionally here is my web-based leveling utility: http://voltfolio.com/utilities/levelgcode.html

https://www.lpkfusa.com/Store/pages/ProductDetail.aspx?cat=11%2f38&cid=38&pid=76

Sorry I must make one amendment - I linked the incorrect milling tools from LPKF. Here are the correct ones:

https://www.lpkfusa.com/Store/pages/ProductDetail.aspx?cat=11%2f38&cid=38&pid=76

vBOM

Visual BOM:

edit

Calculations

edit

Sources

Electronics

edit

Source



Photo Album

  • On google photos - [5]

Videos

  • Mill Experiment - Backlash Compensation Stress Test - [6]
  • Leveled circuit - holder slides at the end - [7]
  • Mill Experiment - Large Leveled Circuit Take 2 - [8]
  • Auto Probing Experiment - [9]
  • Stepper driver breakout board - [10]

Workshop Preparation

edit

Development Template

edit

Burndown

Feb 2018 Update

September 2017 Update

Development Pictures

The disassembled axes required to convert the D3D printer to the circuit board mill

The disassembled axes required to convert the D3D printer to the circuit board mill

These are the required additional parts to transition from the 3D printer to the circuit board mill

These are the required additional parts to transition from the 3D printer to the circuit board mill

The complete set of axes for the D3D circuit mill

The complete set of axes for the D3D circuit mill

Working Document

Design

edit

Data Collection

edit

CAD files

D3dcnccm.png

Simplified Files

Accurate Files

List of Files

Design Notes

Note on CAD Procedure and Organization:

  1. Draw a frame piece, and create a complete frame made of 6 of these pieces.
  2. Save file: File:D3D 13" Frame.fcstd
  3. Begin the design by downloading the X axis - File:D3D 16 Sub-assembly X Axis.fcstd
  4. Correct the length of the axis to 11" length (for 13" frame - 1" shorter on each side to accommodate mounting on the Y axes). Rotate the axis such that the orientation - when looking according to the Viewing Direction and XYZ axis orientation of Slide 1 in Working Document - is that the motor is on the left side of the axis (note that the orientation shown in First Slide in the Working Document has the motor on the right hand side, which is not correct).
  5. Save the file as File:D3D Circuit Mill X Axis.fcstd once the length is 11" and orientation is correct. This will be the file you can use later for the x axis (2 of them) to merge into the final assembly - with the second x axis being a mirror image.
  6. Now create the Y axis according to the orientation convention of the First Slide in the Working Document. This axis should be 13" long.
  7. Save the y axis file as File:D3D Circuit Mill Y Axis.fcstd.
  8. Now create the Z axis as in the working document. This axis can be 8" long - as we don't need a lot of z travel.
  9. Save the Z axis file as File:D3D Circuit Mill Z Axis.fcstd.
  10. Import the

Industry Standards

  • Toner Transfer gets reliable traces down to 0.15 mm, D3D CNC circuit mill works to 0.5 mm traces. [[11]. Disadvantage: a mill can do your holes and cut out your circuit board as well. Advantage - smaller features are possible.
  • Othermill - 0.003 mm positioning, with minimum mill bit of 0.25 mm - [12]. Positioning accuracy is not the limiting factor for features - but mill bit size. Minimum size is the same for D3D and Othermill (0.25 mm).
  • [The Ant PCB Maker]
  • Hackaday projects - [13]
  • Not open source - LilCNC - [14]. Uses Easel online 2D design software.

Existing Open Source Designs

Curriculum

See Also

Useful Links

  • Tom's Guide 2018 discussing inferiority of mill conversions - [16]