CNC Torch Table v17.08

• CNC Torch Table Z Height Control

• 1"_Universal_Axis - still good for former version.

Version 3 Working Doc

edit

Parts Library / CAD

Master

• 

  File:CNC Torch 1708 CAD.fcstd

Modules / Individual Parts

• 

  File:CNC Torch 1in carriage.fcstdFile:CNC Torch 1in carriage.stl

• 

  File:CNC Torch 1in carriage metal plate.fcstd + [[File:CNC Torch 1in carriage metal plate.stl. Template - File:CNC Torch 1in carriage metal plate.pdf. Select Page Handling->No Scaling.

• 

  File:CNC Torch 1708 Motor interface.fcstd. STL for printing - File:CNC Torch 1708 motorside.stl

• 

  File:CNC Torch 1708 Motor interface module.fcstd

• 

  File:CNC Torch 1in carriage module.fcstd For X Axes

• 

  File:Nema23motor.fcstdNema 23 motor.

• 

  File:Bearing 1in.fcstd

• Bolts.png

  Bolt_socket_*****.fcstd

• 

  File:Hex nut 0.25.fcstd

• 

  File:Nema 17 stepper motor.fcstd

• 

  File:GT2 double pulley.fcstd Amazon GrabCad single pulley version

Frame

• 

  File:CNC Torch 1708 Frame module.fcstd

• 

  File:CNC Torch 1708 Rail Support Leg.fcstd

• CNC Torch 1708 Table.png

Rail System

• 

  File:CNC Torch 1708 Y Axis.fcstd

• 

  File:CNC Torch 1708 X Axis.fcstd

• 

  File:CNC Torch 1708 Z Axis.fcstd

Torch

• 

  File:CNC Torch handle.fcstd

• 

  File:CNC Torch 1708 holder.fcstd

Deprecated

See version history - version of October 9, 2017 and earlier - with the double length metal plates. These are not used to allow for adjustability of X axis spacing by using 2 single carriages.

Various Pictures

• 
• 

Wiring

Pins from TB6600 to arduino mega for X axis:

• All 3 negatives (ENA-, DIR-, PUL-) from TB6000, bridged and connected to GRN on Arduino
• ENA+ connected to Pin38
• DIR+ to A1
• PUL+ to A0

Pins from TB6600 to arduino mega for Y axis:

• All 3 negatives (ENA-, DIR-, PUL-) from TB6000, bridged and connected to GRN on Arduino
• ENA+ connected to PinA2
• DIR+ to A7
• PUL+ to A6

Links

• D3D CNC Torch Table