File:CNC Torch 1in carriage.fcstd

From Open Source Ecology
Jump to: navigation, search
CNC_Torch_1in_carriage.fcstd(file size: 181 KB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.

File history

Click on a date/time to view the file as it appeared at that time.

(newest | oldest) View (newer 10 | ) (10 | 20 | 50 | 100 | 250 | 500)
Date/TimeDimensionsUserComment
current23:16, 11 October 2017 (181 KB)Lex Berezhny (talk | contribs)Reduced base from 5.9" long to 142mm.
19:30, 11 October 2017 (165 KB)Lex Berezhny (talk | contribs)Reduced base from 6" long to 5.9".
01:12, 11 October 2017 (165 KB)Lex Berezhny (talk | contribs)
23:12, 10 October 2017 (166 KB)Lex Berezhny (talk | contribs)Bolt holes moved a tiny bit back from edge. Lines up with metal plate.
21:37, 10 October 2017 (165 KB)Lex Berezhny (talk | contribs)Increased length of long side from 5.9" to 6.0". Moved bolt holes on each end by 0.1" towards the edge.
21:29, 10 October 2017 (165 KB)Lex Berezhny (talk | contribs)Changed bearing grove from 1.3" to 1.36".
00:52, 7 October 2017 (166 KB)Lex Berezhny (talk | contribs)Widened belt hole from 12.70mm to 13mm.
03:37, 17 August 2017 (167 KB)Polemidis (talk | contribs)Slightly increased bushing hole
03:24, 17 August 2017 (167 KB)Polemidis (talk | contribs)Increased diameter of the holes so 1/4" bolts can easily pass through. Smaller belt holder pocket. It was too wide
01:51, 16 August 2017 (167 KB)Polemidis (talk | contribs)adjusted to fit the Luzbot Mini
(newest | oldest) View (newer 10 | ) (10 | 20 | 50 | 100 | 250 | 500)
  • You cannot overwrite this file.

The following 3 pages link to this file: