Equipment/Taz
Taz | |
---|---|
Sub-category | CNC |
Status | Good working order |
Last updated | {{#show: Equipment/Taz | ?Modification date}} |
Last updated by | {{#show: Equipment/Taz | ?Last editor is}} |
Consumables | Printer filament |
Training requirement | Yes |
Training link | 3dprinter_training |
Owner | OSE |
Origin | Donation |
Location | Hablab rear, electronics work area |
Maintainers |
Samuel Carlisle {{#set:name=Taz}} {{#set:image=Taz.jpg}} {{#set:status=Good working order}} {{#set:subcat=CNC}} {{#set:location=Hablab rear, electronics work area}} {{#set:owner=OSE}} {{#set:maintainers=Samuel Carlisle}} {{#set:reqtraining=Yes}} {{#set:acnode=}} |
Contents
Description
It is a Taz printer. See also TAZ
Specification & documentation
Printer Specifications
Printing
- Print Surface: Heated Borosilicate glass bed covered with PET film
- Print Area: 298mm x 275mm x 250mm (11.7in x 10.8in x 9.8in)
- Print Volume: 20,500cm3 (1238 in3) of usable space
- Top Print Speed: 200mm/sec (7.9in/sec)
- Print Tolerance: 0.1mm (0.0039in) in X and Y axes. Z axis is dependent on layer thickness
- Layer Thickness: 0.075mm to 0.35mm (0.003in - 0.0138in)
- Supported Materials: ABS, PLA, HIPS, PVA, and wood filaments
- Usable Filament Sizes: standard 3mm (0.1in)
Physical Dimensions
- Overall Dimensions: 680mm x 520mm x 515mm (26.8in x 20.5in x 20.3in)
- Weight: 11kg (24.25lbs)
Electrical
- Power Requirements: 110 - 220 VAC
- Temperature: Maximum operating temperature (Extruder), 240C (464F)
- Temperature: Maximum operating temperature (Heated Bed), 120C (248F)
Consumables
If using any consumables, link here to recommended providers or current pledges to purchase.
Filament options (3.0mm)
- ABS (lego brick plastic - prints at 190-230 DegC, requires heated bed at 100-110 DegC)
- PLA (biodegradable , based on food starch - prints at 185-190 DegC, optional heated bed, not hotter than 60 DegC)
- There are other 'specialist' filament, like wood effect, stone effect, nylon (can be coloured by clothes dye), etc
Loading Filament Excerpt from the manual describing loading filament
3D printing process
Software (Free or Open Source)
- Sketchup Design, go to the Warehouse for the Export STL add-in
- Blender Design, quite complicated
- OpenSCAD The Programmers Solid 3D CAD Modeller. You'll love it or hate it.
- Netfabb Basic Repairing and orienting STL for Slicing
- Meshmixer A new mesh working tool, with support generation
- Slic3r Slicing STL files into GCODE for printing
- Pronteface Connecting the Computer to the printer and PRINTING!
- Octoprint remote control of your printer
Training & instruction
Training IS REQUIRED and is being carried out voluntarily by the current maintainer, more info on the separate training page
Please do not use the printer if you have not been trained, even if you think you know how to use it.
Links
LulzBot_TAZ-User_Manual local copy File:LulzBot TAZ-User Manual-ebook.pdf
There are a number of files provided by Lulzbot with predefined settings. setting 1 is for 0.3mm layers with a 60% infill. setting 2 is for 0.4mm layers and 80% infill.
I would stick with the config in the training section until we complete calibration.
- Cost of 3D printing See what you design would cost if you printed it professionally
- GCODE cost analyser Use 3mm ABS as the standard filament setting, load your file and see the cost
Cost for Printing
Data on the real cost of printing will go here.
Training
Details of training here.
Modification
List modifications here.