File:D3d pro 2.ini
Autoparallel means move both Y axes to Y0, which is origin, which is not the same as G28 Y0 - which homes Y either to Y max or Y min, depending on endstop settings. So G28 Y0 goes to Y Max. G0 Y0 goes to the origin of zero, which will be determined by bed size in Marlin.
Click on a date/time to view the file as it appeared at that time.
|current||16:26, 7 July 2020||(10 KB)||Marcin||3 mm retraction. 1.2 nozzle.|
|19:28, 9 June 2020||(10 KB)||Marcin||Back to 1.2 nozzle|
|18:33, 30 April 2020||(10 KB)||Marcin||Corrected y move back to 50|
|23:29, 29 April 2020||(10 KB)||Marcin||Changed downward move at end to 255 mm for Z bed.|
|00:48, 27 April 2020||(10 KB)||Marcin||Added auto skew correction, and move back by 30 on y to get back over bed with probe.|
|18:01, 26 April 2020||(10 KB)||Marcin||Updated for auto parallel, and proper lowering of bed.|
|16:38, 26 April 2020||(10 KB)||Marcin|
|07:12, 20 April 2020||(10 KB)||Marcin|
- You cannot overwrite this file.