JET LOG
(Redirected from Joshua Log)
Highlights
August 2021
August 24, 2021
- Rebuilt Extruder Head
- Bearing loose, rotor came off needed to reattach
- Babystepped Z Axis to get better alignment to build plate
- Dual end stops?
- Mechanical vs Optical vs Magnetic
August 22, 2021
- Y axis working again after filing down heated bed carriage piece. Belt was grinding against rough edges inside.
- Thinking about printer build ergonomics
- Y end stop doesn't remain in place, need to continually readjust but works otherwise.
- Printer lowers down too far when printing and nozzle crashes into print bed. Z offset has been adjusted per Ken's recommendation but still not able to get good prints.
- Switched to positive end and printer is far enough away to print. Need to refine.
- Filament leaks through nozzle even when Extruder is not engaged. Possibly need to replace the nozzle.
- Will switch one Z axis rod as the other previously swapped out was too short but now this one is too long and I cannot attach Spool Holder.
- Extruder wires seem to be reversed. The causes the printer to send out filament rather than take it in during print.
- Extruder behavior corrected by swapping wires.
- Need to adjust X/Y axis offsets. Printer prints off of the bed.
July 2021
July 10, 2021
- Look into feasibility of moving into FreeCAD 19
- Need to updated instructionals
- Standing up project management infrastructure
July 3, 2021
- HeroX Challenge Collaboration
- Business Case Study
To Do
- Look into possible media wiki extension for tracking hours log
- Send requested materials to access Dev VPN
July 2, 2021
- Began building Eco-home modules
- Design Lessons
July 1, 2021
- Began apprenticeship, clearing workshop and design lessons
June 2021
Thu Jun 24, 2021
- Filled out Apprenticeship Survey
- Updated Intentional Communities Page
Fri June 18, 2021
- Fider is up and working after learning more about Docker.
- Need to finish setting up mail server and purging DB instance before testing.
- Shipping Tools/Equipment/QoL Items to site
- Researching viability of moving certain workloads to containerized environment
- Working on Assessment form
Thu June 10, 2021
- Built out Fider app in OOTO Cloud
- Need to troubleshoot configuration with Docker
- Do not use Ubuntu Snap-In's with Docker.
Wed June 2, 2021
- Fider Upvoting App Test Build
May 2021
Sat May 29, 2021
- Build Test Servers
- Discuss IT Solutions
- Completing Initial Assessment
Thu May 27, 2021
- OnlyOffice/NextCloud Integration
- Completing Apprenticeship Forms
- Creating/Completing Initial Assessment
Wed May 26, 2021
- Building/Configuring OnlyOffice Server
- Reviewing Videos/Eco-Home Build Cheatsheets
Tue May 25, 2021
- Building/Configuring NextCloud Server
Mon May 24, 2021
- Added wall module 16 to build cheatsheet
Sun May 23, 2021
- Seed Eco-Home 2 Design Sprint
- Updated OSE Software Stack
Thu May 20, 2021
- Creation of this work log
- Attended Sustainable Buildings Webinar held by LoraWAN - Need to review materials
- Familiarizing myself with wiki page
- Submission of qualification video for FreeCAD OSE Badge
