Daily Product Development Meeting: Difference between revisions
Jump to navigation
Jump to search
| (99 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
=Production= | {{RightTOC}} | ||
=Production Meeting Notes= | |||
=='''October 28 - November 3'''== | |||
===Nov 18, 2013=== | |||
*MH -- Need to install the stove today, Mark will work on siding | |||
*Trencher -- issue with the plates vs the SketchUp mode, made corrections to the prototype, need to update CAD | |||
*CNC TT -- Sam is up to speed on CNC TT status; | |||
===Oct 31, 2013=== | |||
'''Agenda:''' 1) Ironworker, 2) MH, 3) Infrastructure, 4) Logistics, 5) Documentation, 6) CNC Torch Table, 7) Construction | |||
*Ironworker - Ironworker has legs; still needs a guide installed on the table--99% built; still need to update all of the documentation; upload pictures for legs and build documentation instructions; going to cut tubing today | |||
*MH -- Working on Dozuki after lunch; meeting with Dan Overby to discuss energy modeling; | |||
*Infrastructure -- still raining, not going to have Jake come out today; Jake was able to remove the bricks around the stove so we can re-install when welding is complete | |||
*Documentation -- | |||
*CNC TT -- Hardware needs to be updated, but is working now; need to replace one of the motor mounts; wants to create some software for testing; is moving in 3 dimensions now | |||
*Construction -- MH is the south: Ideal client -- Has land to build it, has the capital to build it (~$15K), has place for attendees to stay/camp, has experience with construction/planning/building, in the south, will dedicate a blog post to this, other logistics: would need to transport our equipment/tractor | |||
*Other -- 1) Discussed Theodore/Haiti Project with Chris for his SA, 2) Marcin is focused on the Shuttleworth application, 3) Microcar -- Yann is willing to come out in Dec; received Shuttleworth grant; perhaps mid-Jan to Feb will be better -- need to coordinate | |||
===Oct 30, 2013=== | |||
'''Held mini Production meeting today.''' | |||
*Ironworker -- refined precision cutting, putting on feet today, continuing documentation | |||
*MH -- Mark is getting more wood to complete trim | |||
*Infrastructure -- Rick is going to come out today to finish digging the drain pipe; Sweiger has the stove, should be done Thurs/Fri | |||
*Logistics -- Marcin & Dan depart on Fri. They will drive the truck to St Joe and Katie will take them to the airport in her car | |||
===Oct 29, 2013=== | |||
'''Agenda:''' 1) Ironworker, 2) MH, 3) Infrastructure, 4) Logistics, 5) Documentation | |||
*Ironworker -- Sheared 1x8 yesterday; captured documentation of the process -- shear documentation & useage; will be used as part of our workshop infrastructure; need to finish the table, level the table, complete the guide/backstop, and install feet--Dozuki guides will need more work as well; need to capture what was built in Sketchup | |||
*MH -- need to complete documentation and upload to Dozuki, but this is a lower priority than the Shuttleworth documentation deliverables for the Ironworker and the Backhoe; Mark needs more wood to finish the framing; still has two more days of "finishing" work | |||
*Infrastructure -- '''Stove:'''Sweiger is making the doors, Marcin wants to deliver the entire structure (frame, etc) so they can finish everything--then we will simply need to install it --- Marcin would like to build a second stove for the workshop for this winter; Marcin will call Sweiger so he can explain what work needs to happen with the frame and how to attach the doors; Marcin wants Mark to install the stove once its done; Marcin wants the bricks removed around the stove; '''Bush hog:''' Need to contact Gary to get status when he can come out (Katie) | |||
*Documentation -- '''MH:''' He is uploading to Trovebox, reloading them to 900x600 resolution; Marcin would like for the MH to be divided into sub-folders (i.e. foundation, etc--use what is in Dozuki); Marcin wants to meet with Chris & Rob to work sort documentation (meet today at 1pm CDT); '''Backhoe:'''We are missing step instructions, etc for what Cory & Leandra did this summer during 6 in 60; need to ID what documentation is outstanding by each module; Marcin would like to focus Wed/Thurs focusing on documentation -- photos, work instructions, & utilize 3D graphics if we don't have photos for instructions | |||
*Other: Dan is leaving tomorrow @3:35pm, needs a ride | |||
===Oct 28, 2013=== | |||
'''Agenda:''' 1) Design Sprint, 2) Ironworker, 3) MH, 4) Infrastructure, 5) Logistics, 6) Documentation | |||
*Design Sprint Update-- Created a full Dozuki guide for the Ironworker; needs some editing; | |||
**Applying this model to the Laser Cutter project -- let's do this same model and get people to support the 3-4 day build process while@ Lasersaur; ACTION -- Marcin to develop a schedule & agenda for Lasersaur (Tues, Wed, Thurs); will advertise via the Blog & through the newsletter; | |||
*Ironworker -- 2/3s re-assembled; switched tubing from 2/3 to 1/2; cutting 1x6s today; | |||
*MH -- | |||
'''NOTE: meeting interrupted due to HabLab internet going down''' | |||
<html> | <html> | ||
| Line 369: | Line 412: | ||
<!----------------------------------------------------------------------> | <!----------------------------------------------------------------------> | ||
</html> | </html> | ||
==Logs== | ==Logs== | ||
*[[Cody Log]] | *[[Cody Log]] | ||
*[[Dan Log]] | *[[Dan Log]] | ||
*[[Emmett Log]] | |||
=Current Product Development= | =Current Product Development= | ||
==Backhoe== | ==Backhoe== | ||
[https://docs.google.com/spreadsheet/ccc?key=0ArpE5Y9PpJCXdEk3T0FfVmVuQ0pLNXhONVdieGdEOGc&usp=sharing Backhoe Development Board] | |||
[https://docs.google.com/drawings/d/1P562UAH321MnYIJlpDH0fJf5xIA3WRXkH6cLJPTDlfI/edit?usp=sharing Backhoe Problem Statement] and [https://docs.google.com/drawings/d/1P562UAH321MnYIJlpDH0fJf5xIA3WRXkH6cLJPTDlfI/edit?usp=sharing Backhoe Pivot ROM Concept] | |||
[[Backhoe Side to Side Pivot Module]] | |||
[http://opensourceecology.dozuki.com/c/Backhoe Dozuki Docs: Backhoe] | |||
''Contact the Backhoe Development Team: ose-backhoe-development@googlegroups.com'' | |||
==Ironworker== | ==Ironworker== | ||
[https://docs.google.com/drawings/d/1yp3DInGt6DzvtYVSmJ7HzYmBsalZyJS5cg1pv07ljC0/edit?usp=sharing Ironworker Problem Statement] | |||
[http://opensourceecology.org/wiki/Ironworker_Deliverables_Board Ironworker Product Development Board] | |||
[https://docs.google.com/spreadsheet/ccc?key=0Aqfjnh3lOWcCdERQTk5vcndYMk5ra0Rmbmw3ZEJsc2c&usp=sharing Product Development Board - Ironworker Frame Module] (to integrate the feet) | |||
[https://docs.google.com/spreadsheet/ccc?key=0Aqfjnh3lOWcCdDYtS01CR1FfZXhRN0czQUd1LXc4NVE&usp=sharing Product Development Board - Ironworker Hole Punch Element Module] | |||
[https://docs.google.com/spreadsheet/ccc?key=0Aqfjnh3lOWcCdGI4Z0hha3pKR2M0NURiSjJQM2NFNXc&usp=sharing Product Development Board - Ironworker Shear Table Module] | |||
[http://opensourceecology.dozuki.com/c/Ironworker_Machine Dozuki Docs: Ironworker] | |||
==LifeTrac 6== | ==LifeTrac 6== | ||
[http://opensourceecology.org/wiki/LifeTrac_6_-_Development_Board LifeTrac 6 Development Board] | |||
[http://opensourceecology.dozuki.com/c/LifeTrac Dozuki: LifeTrac 6] | |||
==Microhouse== | ==Microhouse== | ||
[[Chris Reinhart Log]] | |||
[https://docs.google.com/spreadsheet/ccc?key=0ArpE5Y9PpJCXdC1KNG80OWRmdk85TlBQTVA3YWhRbEE&usp=sharing Microhouse Prep / Checklist] | |||
[https://docs.google.com/a/opensourceecology.org/document/d/1ViixwxMwXGQpulr6DlymmxLcnc3r1yHr1uhZy-qBQkI/edit Microhouse Prototype Assessment] | |||
=Production Rhythm= | =Production Rhythm= | ||
| Line 403: | Line 474: | ||
*Schedule | *Schedule | ||
= | =Older Entries - Meeting Notes= | ||
*[[Daily Product Development Meeting/Notes Oct 21-25]] | |||
* | *[[Daily Product Development Meeting/Notes Oct 14-20]] | ||
*[[Daily Product Development Meeting/Notes Oct 7-11]] | |||
* | |||
* | |||
Latest revision as of 16:22, 18 November 2013
Production Meeting Notes
October 28 - November 3
Nov 18, 2013
- MH -- Need to install the stove today, Mark will work on siding
- Trencher -- issue with the plates vs the SketchUp mode, made corrections to the prototype, need to update CAD
- CNC TT -- Sam is up to speed on CNC TT status;
Oct 31, 2013
Agenda: 1) Ironworker, 2) MH, 3) Infrastructure, 4) Logistics, 5) Documentation, 6) CNC Torch Table, 7) Construction
- Ironworker - Ironworker has legs; still needs a guide installed on the table--99% built; still need to update all of the documentation; upload pictures for legs and build documentation instructions; going to cut tubing today
- MH -- Working on Dozuki after lunch; meeting with Dan Overby to discuss energy modeling;
- Infrastructure -- still raining, not going to have Jake come out today; Jake was able to remove the bricks around the stove so we can re-install when welding is complete
- Documentation --
- CNC TT -- Hardware needs to be updated, but is working now; need to replace one of the motor mounts; wants to create some software for testing; is moving in 3 dimensions now
- Construction -- MH is the south: Ideal client -- Has land to build it, has the capital to build it (~$15K), has place for attendees to stay/camp, has experience with construction/planning/building, in the south, will dedicate a blog post to this, other logistics: would need to transport our equipment/tractor
- Other -- 1) Discussed Theodore/Haiti Project with Chris for his SA, 2) Marcin is focused on the Shuttleworth application, 3) Microcar -- Yann is willing to come out in Dec; received Shuttleworth grant; perhaps mid-Jan to Feb will be better -- need to coordinate
Oct 30, 2013
Held mini Production meeting today.
- Ironworker -- refined precision cutting, putting on feet today, continuing documentation
- MH -- Mark is getting more wood to complete trim
- Infrastructure -- Rick is going to come out today to finish digging the drain pipe; Sweiger has the stove, should be done Thurs/Fri
- Logistics -- Marcin & Dan depart on Fri. They will drive the truck to St Joe and Katie will take them to the airport in her car
Oct 29, 2013
Agenda: 1) Ironworker, 2) MH, 3) Infrastructure, 4) Logistics, 5) Documentation
- Ironworker -- Sheared 1x8 yesterday; captured documentation of the process -- shear documentation & useage; will be used as part of our workshop infrastructure; need to finish the table, level the table, complete the guide/backstop, and install feet--Dozuki guides will need more work as well; need to capture what was built in Sketchup
- MH -- need to complete documentation and upload to Dozuki, but this is a lower priority than the Shuttleworth documentation deliverables for the Ironworker and the Backhoe; Mark needs more wood to finish the framing; still has two more days of "finishing" work
- Infrastructure -- Stove:Sweiger is making the doors, Marcin wants to deliver the entire structure (frame, etc) so they can finish everything--then we will simply need to install it --- Marcin would like to build a second stove for the workshop for this winter; Marcin will call Sweiger so he can explain what work needs to happen with the frame and how to attach the doors; Marcin wants Mark to install the stove once its done; Marcin wants the bricks removed around the stove; Bush hog: Need to contact Gary to get status when he can come out (Katie)
- Documentation -- MH: He is uploading to Trovebox, reloading them to 900x600 resolution; Marcin would like for the MH to be divided into sub-folders (i.e. foundation, etc--use what is in Dozuki); Marcin wants to meet with Chris & Rob to work sort documentation (meet today at 1pm CDT); Backhoe:We are missing step instructions, etc for what Cory & Leandra did this summer during 6 in 60; need to ID what documentation is outstanding by each module; Marcin would like to focus Wed/Thurs focusing on documentation -- photos, work instructions, & utilize 3D graphics if we don't have photos for instructions
- Other: Dan is leaving tomorrow @3:35pm, needs a ride
Oct 28, 2013
Agenda: 1) Design Sprint, 2) Ironworker, 3) MH, 4) Infrastructure, 5) Logistics, 6) Documentation
- Design Sprint Update-- Created a full Dozuki guide for the Ironworker; needs some editing;
- Applying this model to the Laser Cutter project -- let's do this same model and get people to support the 3-4 day build process while@ Lasersaur; ACTION -- Marcin to develop a schedule & agenda for Lasersaur (Tues, Wed, Thurs); will advertise via the Blog & through the newsletter;
- Ironworker -- 2/3s re-assembled; switched tubing from 2/3 to 1/2; cutting 1x6s today;
- MH --
NOTE: meeting interrupted due to HabLab internet going down
Logs
Current Product Development
Backhoe
Backhoe Problem Statement and Backhoe Pivot ROM Concept
Backhoe Side to Side Pivot Module
Contact the Backhoe Development Team: ose-backhoe-development@googlegroups.com
Ironworker
Ironworker Product Development Board
Product Development Board - Ironworker Frame Module (to integrate the feet)
Product Development Board - Ironworker Hole Punch Element Module
Product Development Board - Ironworker Shear Table Module
LifeTrac 6
Microhouse
Microhouse Prototype Assessment
Production Rhythm
Monday
- Enterprise Program Review
- Review Design Sprint Product(s)
Tuesday
- Logistics
- Shop Equipment Status
- Repair Status
- Supply Status - Long Lead Parts, High Risk Parts
- Other Logistics Issues
Wednesday
- Issues & Risks
Thursday
- Schedule