CEB Press Workshop 2016 Working Page: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 6: Line 6:
*[[Data]] - take any data notes here
*[[Data]] - take any data notes here
*[[CEB Press v16.09]] - Prototype 8
*[[CEB Press v16.09]] - Prototype 8
*[[CEB Press Workshop]]
=Cut List=
=Cut List=
6 Abrasive Cutoff Saws. Torch. Mag drill.
6 Abrasive Cutoff Saws. Torch. Mag drill.

Revision as of 12:12, 23 September 2016

X for extreme manufacturing.

Cut List

6 Abrasive Cutoff Saws. Torch. Mag drill.

  • [20] 2.5" square tube sleeves - 6" long
  • Torch 1 hole for 3/4" bolts in all sleeves
  • [4] Hinges - 30" sections
  • [2] Hopper Supports - 2" tube - 2.5' long
  • [2] Hopper Supports - 2" tube - 3' long
  • [4] Legs - 2" tube - 3' long
  • [31] hopper slats - 24" long
  • [1] hopper slat - 56" long

Shot List

Part - Assemdbly - Module

  • parts before any work
  • grinding slag from each piece
  • grinding all edges
  • painting

Hopper

  • Label all parts
  • take picture of ALL parts before any work. Includes bolts.
  • grinding slag from each piece
  • grind sharp corners
  • painting
  • Mark holes on hinges from hopper pattern
  • Mag drill holes in hopper pieces
Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press_Workshop_2016_Working_Page&oldid=144452"