3D Printed Electric Motor: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Minor Organizational Changes)
No edit summary
Line 1: Line 1:
=Examples=
=Examples=
*MakeSEA 600W motor - [https://skaviusportfolio.com/2017/07/09/makesea-3d-printed-electric-motors/]. MakeSEA 40 and 90W - 0.06 peak Nm torque - about 70% efficiency - [https://www.youtube.com/watch?v=JkwLpAAfBVI]
*MakeSEA 600W motor - [https://www.makesea.com/web/claimer/brushless-motor]. MakeSEA 40 and 90W - 0.06 peak Nm torque - about 70% efficiency - [https://www.youtube.com/watch?v=JkwLpAAfBVI]
*French project - radial motor - .14 Nm torque - 100W - [https://www.youtube.com/watch?v=Irc8EkJusTE]
*French project - radial motor - .14 Nm torque - 100W - [https://www.youtube.com/watch?v=Irc8EkJusTE]
*Small Halbach array generator - 7W per 1000 rpm - [https://www.youtube.com/watch?v=Irc8EkJusTE]
*Small Halbach array generator - 7W per 1000 rpm - [https://www.youtube.com/watch?v=Irc8EkJusTE]

Revision as of 16:37, 15 February 2019

Examples

  • MakeSEA 600W motor - [1]. MakeSEA 40 and 90W - 0.06 peak Nm torque - about 70% efficiency - [2]
  • French project - radial motor - .14 Nm torque - 100W - [3]
  • Small Halbach array generator - 7W per 1000 rpm - [4]

See Also

Retrieved from "https://wiki.opensourceecology.org/index.php?title=3D_Printed_Electric_Motor&oldid=185891"