Latest revision as of 02:53, 12 December 2019

X for extreme manufacturing.

Cut List

6 Abrasive Cutoff Saws. Torch. Mag drill.

Part - Assemdbly - Module

@@ Line 1: / Line 1: @@
 X for extreme manufacturing.
-*[[CEB_Press_6#Instructional_Files]]
+*FreeCAD file - [[File:CEBPressJuneGroup.fcstd]]
-*[OSE Workshops FB Page https://www.facebook.com/groups/398759490316633/]
+*[[CEB_Press_6#Instructional_Files]] - detailed instructions from 2014 build
-*[[Data]]
+*[https://www.facebook.com/groups/398759490316633/ OSE Workshops FB Page] - post all pictures there.
+*[[Data]] - take any data notes here
+*[[CEB Press v16.09]] - Prototype 8
+*[[CEB Press Workshop]]
 =Cut List=
-*[4] Hinges - 26.5"
+Abrasive Cutoff Saws. Torch. Mag drill.
+*[20] 2.5" square tube sleeves - 6" long
+*Torch 1 hole for 3/4" bolts in all sleeves
+*[4] Hinges - 30" sections
+*[2] Hopper Supports - 2" tube - 2.5' long
+*[2] Hopper Supports - 2" tube - 3' long
+*[4] Legs - 2" tube - 3' long
+*[31] hopper slats - 24" long
+*[1] hopper slat - 56" long
+*[6] aluminum sheet metal
+=Shot List=
+Part - Assemdbly - Module
+*parts before any work
+*grinding slag from each piece
+*grinding all edges
+*painting
+==Hopper==
+*Label all parts
+*
+*take picture of ALL parts before any work. Includes bolts.
+*grinding slag from each piece
+*grind sharp corners
+*painting
+*Mark holes on hinges from hopper pattern
+*Mag drill holes in hopper pieces