Soil Mixer 2019/Controller: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(→‎Old Crappy Hydraulic Simulations: - moving to another page)
 
(6 intermediate revisions by the same user not shown)
Line 59: Line 59:


===20Nm Load on Motor===
===20Nm Load on Motor===
Check out these videos first. 20nm load derived on mixer main page in design review section
20nm load derived on mixer main page in design review section
{|
 
|+style="font-size:150%"|'''Soil Mixer Circuit Simulations'''
Download Circuit: [[File:SoilMixerFluidSIMCircuits.zip]]
!Series Circuit
 
!Sequence Valve Circuit Closed Center Valve
Older simulations: [[/Hydraulic Simulation Archive]]
!Sequence Valve Circuit Open Center Valve
 
{|class="wikitable"
!Production-Ready Circuit
|-
|-
|<html><video width="350" height="350" loop controls ><source src="https://github.com/CabbageBreath/CabbageBreath.github.io/raw/master/Soil%20Mixer%202019/20Nm%20Series-1.webm" type="video/webm"></video></html>
|<html><video controls loop src="https://github.com/CabbageBreath/CabbageBreath.github.io/raw/master/Soil%20Mixer%202019/Series%20Circuit%2012-24-1.webm" height="100%" width="100%"></video></html>
|<html><video width="350" height="350" loop controls ><source src="https://github.com/CabbageBreath/CabbageBreath.github.io/raw/master/Soil%20Mixer%202019/20Nm%20Sequence%20Closed%20Center-1.webm" type="video/webm"></video></html>
|<html><video width="350" height="350" loop controls ><source src="https://github.com/CabbageBreath/CabbageBreath.github.io/raw/master/Soil%20Mixer%202019/20Nm%20Sequence%20Open%20Center-1.webm" type="video/webm"></video></html>
|-
|-
|13.25 GPM through valve. Motor speed up to 4K RPM on cyl retract. When cylinder bottoms out, fluid has no path to tank and flow stops through the system.
!Stepping Through This Circuit
|Whereas the third circuit has difficulty retracting the cylinder under heavy motor loads, this circuit has no such condition. Flow rate through motor significantly decreased when cylinder is traveling as all cylinder flow is lost to tank.
!Automated For Viewing Convenience
|If the motor is loaded more than 20Nm(maybe 40Nm, the cylinder cannot retract. I'm not entirely sure why this is yet. If the motor is loaded at 20Nm then the circuit behaves well and all flow from cylinder goes to motor during cylinder travel.
|-
|{{YoutubePopup|mH2onJqJIl8|big}}
|{{YoutubePopup|xVSR72DBsYI|big}}
|-
|Manually stepping through circuit with narration
|Automated, silent. Cylinder switched using pressure switch
|}
|}

Latest revision as of 15:01, 28 December 2019

This page includes information about the entire electromechanical hydraulic control system for the soil mixer. This is a variant of CEB Press Controller v19.01


Controller Requirements

  • Needs to switch a double acting cylinder while running a hydraulic motor
  • Needs to cycle a dc motor for cement dosing
  • Water mister solenoid

Electronics

  • Mega 2560
  • Relay Shield (3A)
  • External Relays boards for >3A
  • Fused Battery Connection
  • High Pressure Switch

Hydraulics

Hydraulic Calculations

Hydraulic Cylinder Volumes. 2.5x12x1.25 Cylinder
Cap End Volume:((2.5in)/2)^2 * 3.14 * 12in =58.875 cu in
Rod Volume: ((1.25in)/2)^2 * 3.14 * 12in = 14.71875 cu in
Rod End Volume = 58.875 cu in - 14.71875 cu in = 44.15625‬ cu in

Cylinder Travel Speeds
Flow Rate Extend Time Retract Time
5 GPM 3.06s 2.29s
7.5 GPM 2.04s 1.53s
10 GPM 1.53s 1.15s
12.5 GPM 1.22s 0.92s
15GPM 1.02s 0.76s

Hydraulic Diagram


edit


Hydraulic Circuit Simulation

20Nm Load on Motor

20nm load derived on mixer main page in design review section

Download Circuit: File:SoilMixerFluidSIMCircuits.zip

Older simulations: /Hydraulic Simulation Archive

Production-Ready Circuit
Stepping Through This Circuit Automated For Viewing Convenience
http://img.youtube.com/vi/mH2onJqJIl8/0.jpg http://img.youtube.com/vi/xVSR72DBsYI/0.jpg
Manually stepping through circuit with narration Automated, silent. Cylinder switched using pressure switch