Biogas Upgrader: Difference between revisions
Jump to navigation
Jump to search
(Created Page + Added Basic Sections/Info) |
(Added some more information) |
||
Line 13: | Line 13: | ||
*Removes H2S and CO2 | *Removes H2S and CO2 | ||
*Has a low pressure out feed with quick disconnects to connect to other devices such as a [[Natural Gas Compressor]] | *Has a low pressure out feed with quick disconnects to connect to other devices such as a [[Natural Gas Compressor]] | ||
=Design Research= | |||
*From Wikipedia: | |||
Water washing | |||
The most prevalent method is water washing whereby high pressure gas flows into a column in which the carbon dioxide and other trace elements are scrubbed by cascading water running counter-flow to the gas. This arrangement can deliver 98% methane with manufacturers guaranteeing maximum 2% methane loss in the system. It takes roughly between 3% and 6% of the total energy output in gas to run a biogas upgrading system | |||
So essentially a simple wet scrubber | |||
=Basic Design= | =Basic Design= |
Revision as of 18:29, 13 January 2020
Basics
- A Device that "Upgrades" Biogas to the same quality and roughly the same standards as Natural Gas, thus allowing it to be used with the existing infastructure such as CNG
- May reduce damage caused by H2S if present in the biogas
Industry Standards
Existing Open Source Designs
Minimum Viable Product
- Modular
- Removes H2S and CO2
- Has a low pressure out feed with quick disconnects to connect to other devices such as a Natural Gas Compressor
Design Research
- From Wikipedia:
Water washing The most prevalent method is water washing whereby high pressure gas flows into a column in which the carbon dioxide and other trace elements are scrubbed by cascading water running counter-flow to the gas. This arrangement can deliver 98% methane with manufacturers guaranteeing maximum 2% methane loss in the system. It takes roughly between 3% and 6% of the total energy output in gas to run a biogas upgrading system
So essentially a simple wet scrubber