Technology Modules: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Add link to chipper hammermill machine)
Line 96: Line 96:
*High pressure pump module
*High pressure pump module


=Electrolysis=
=Electrolysis and Electrochmistry=
*Carbide production
*Carbide production
*Graphite production
*Graphite production
Line 102: Line 102:
*Sodium hydroxide production
*Sodium hydroxide production
*Hydrochloric acid production
*Hydrochloric acid production
*


=Power Electronics=
=Power Electronics=

Revision as of 19:51, 12 April 2020

Introduction

Here we define a structural primitives approach to functionality of machines. This is based on a notion that ultimately, sourcing of materials - the material instantiation of artifacts - is important. This is because we focus this work around ubiquitous access to materials, and as such, we consider accessible materials in the design process.

We break down technology by areas and construction sets. We go down in detail here - to submodules. These include materials, basic structures, basis functional units.

The goal here is material abundance and resilience, based on distributed microfactories that have about $100k of startup capital, and are further bootstrapped into further Technological Recursion.

Work Doc

edit

Modules List

Here we list sectors/areas of societal operations.

Sensors

  • pH
  • T - room, high (1000C), low (-273C)
  • Humidity
  • Dissolved Oxygen
  • Oxygen demand
  • Oxygen in blood - Pulse Oximeter
  • Capnography - CO2 in breath
  • pressure - low - any fluid - breathing range
  • Pressure - medium - 50-100 PSI
  • Pressure - high - 3000 PSI
  • Oxygen detector
  • Oxygen sensor
  • Refractometer
  • Chromatography
  • HPLC

Electric Power

Outcomes: electric power generation, electric drive, electricity storage

  • Axial flux electric motor. Relies on high-strength magnets.\
  • Linear Electric Motor
  • Solenoid valve
  • Fast-acting, high pressure solenoid - steam engine valves
  • High pressure solenoid - hydraulic valves
  • Air solenoid - low p
  • Air solenoid - med p
  • Air solenoid - high p

Mechanics and Power Transmission

Outcomes: Mechanical drive.

  • Ball bearings
  • Bushings - plastic or bronze
  • Gear - split ring planetary
  • Gear - planetary
  • Gear - herringbone standard
  • Heavy geardown - 15,000 in lb force rubberized gears
  • Belts - rubber, nylon-belted, steel belted; heater belts with embedded nichrome
  • Pulleys
  • Linear rail, 3d printed with metal balls
  • Linear bushing - 3d printed with metal balls
  • Slew bearing
  • 3D printed bearing with metal balls
  • Cylinder - high pressure hydraulic
  • Piston - for pump
  • Piston pump
  • Piston - engine

Metallurgy

Metal rolling, rod+wire production, alloying, any metal chemistry.

  • Metal shaft - how to produce one from scrap steel with induction furnace.
  • Copper wire
  • Insulated copper wire - for windings*Induction heater
  • Crucible construction set - steel melting
  • Reusable casting graphite molds - [1]
  • Induction coil construction set
  • Induction circuit construction set
  • Continuous melt induction furnace
  • CNC adjustable Metal roller
  • Reciprocating metal conveyor
  • Arc furnace crucible
  • Hall-Heroult crucible
  • Graphite electrodes
  • Aluminum from scrap sources
  • Tool and die - grinder
  • Tool and die - hardening furnace
  • Tool and die - shield gas production
  • Limestone to produce carbon dioxide shielding gas
  • Alloying
  • Metal rolling - cooled roller
  • Metal rolling - roller drive, reciprocating
  • Zone refining - for steel production
  • Zone refining - for silicon production

Clean Room/Space

  • Vaccuum pump module
  • High pressure pump module

Electrolysis and Electrochmistry

  • Carbide production
  • Graphite production
  • Aluminum production
  • Sodium hydroxide production
  • Hydrochloric acid production

Power Electronics

  • Rectifier
  • Chopper circuit - selecting the chopping frequency
  • Signal module + software
  • Transistor module
  • Welder soft start circuit

Chemistry

  • Salt, water, sand, clay, and charcoal to hydrochloric acid, sodium hydroxide, carbide, graphite, hydrogen, oxygen, silicon, and aluminum.
  • Sugar, vinegar, starch to sugar production, bioreactors to lactic acid, polymerized to PLA.
  • Fractional distillation of wood 0 alkane production, alkene production
  • Charcoal production
  • Alcohol production
  • Starch to polylactic acid
    • See Polylactic acid
    • TODO: Make a more focused page for "Starch to polylactic acid" or link to sub-section.
  • Polylactic acid to PLA
    • See Polylactic acid
    • TODO: Make a more focused page for "Polylactic acid" or link to sub-section.

Heavy Equipment

Combines to modules for construction, materials handling, mining, agriculture, earthworks

  • Blade
  • Scraper
  • Backhoe
  • 360 degree pivot
  • Tracks
  • Heavy duty traction wheels
  • Pivots - simple
  • Articulated steering
  • Telescoping cylinders
  • Cylinders
  • Telescoping arms
  • Forks
  • Buckets
  • Grapple
  • Saw - tree or earth with removable teeth
  • Saw - tractor-mounted tree
  • Mulcher attachment
  • Pulverizer
  • Seeder
  • Sprayer
  • Spreader
  • Baler - round
  • Baler - square
  • Hay rake
  • Mower - sickle bar
  • Mower - rotary

Cordless Power Tools

Automotive

  • Brakes
  • Steering
  • Frame

Space and Rockets

Air travel, such as multirotors, airplanes, rockets, telecom.

  • Drone software
  • Drone controls

Machining

  • Air bearings
  • Mill Bits
  • Grinders - for tool and die
  • Steel Hardening - tool steel from millable steel
  • Tool Change apparatus
  • Lathe Module
  • Mill Module
  • Drill Module
  • Digital readout
  • Shaft from bloom
  • Multimachine for bolts and threads and geometries
  • Welder gun
  • Honing - for cylinders
  • Heavy duty drill

Lasers and Optics

  • CO2 laser tube
  • Laser toolhead
  • Laser light bending optics - open source laser lens mounts (Pearce et al)

Heavy Metal Working

  • Bolt head stamping
  • Ironworker shear
  • Ironworker holepunching
  • Forging

Materials

Outcomes: machinery for materials processing: vessels, pressure vessels, heating systems, pumping systems, blowing systems, ball/roller mills, shredders, cutters, hammermills. Powders and particle grading. Containers, vessels in general - at all pressures for all materials. Piping and plumbing.

Pneumatics

Pneumatics, hydraulics, valves. Combines with Safety for air purification, and clean-rooms for semiconductors.

  • Ball valve - manual closure, all flow rates
  • Poppet valve - engines
  • Check valve - ball
  • Check valve - diaphragm
  • Bump valve - steam engines
  • Solenoid piston/plunger valve - automated on-off; 3 pressure ranges
  • Biocompatible PVC
  • Inspiratory Valve - ventilators
  • Exhalation valve - respirators (unpowered, powered), fully enclosed face masks, fully enclosed helmets, ventilators
  • PEEP valve - or water bucket version (see University of Florida Ventilator)
  • Pressure Regulator
  • SCUBA Regulator

Electrolysis and Arc Furnce

Outcomes: hydrogen, calcium carbide, iron from ore, aluminum from clay.

Ceramics

Outcomes: fillers, pottery, 3D printable. Overlap with printing.

  • Clay powder production - fillers, 3D printing
  • Continuous clay feed from dry powder (3D printing)

Plastics and Process Engieneering

  • PLA production bioreactor
  • Cellulose acetate
  • lactic acid production for Sweet Potato PLA - [2]
  • thermoplastic elastomer blends (thermoplastic + thermoset or thermoplastic rubber)
  • Feedstocks for recycling: PE, PP, nylon, TPU, TPE blends, PVC, ABS, acetal (gears), PEI (high temp), polycarbonate (impact, glazing), cellulose acetate (bioplastic), PLA (bioplastic).
  • Fractioning column for wood to fuels and oils
  • Shielding gas - laser sintering, induction, build chamber for WAAM

Valves and Switches

  • Ball Valves - pneumatic, hydraulic
  • Soleonoid valves - pneu/hydraulic, all pressure from 1 psi to 3000 PSI
  • Check valves - all pressures
  • Seals - rubber. O-rings.
  • Stainless steel vessels
  • High temperature refractory vessels
  • Auger making
  • Solenoid switch
  • Solid state switch

Material Preparation

  • Shredder / Rock Crusher - heavy duty up to cars, tires, rocks. Up to 15k lb drive at teeth.
  • Grinder - metal blades cutting off little chunks, such as multiple sawmill blades for sawdust
  • Smaller duty shredder - plastic, wood, etc
  • Laimet screw chipper
  • Hammermill - fast chopping
  • Ball mill - for making powders such as dry pottery clay
  • Roller mill - for powders
  • Pelltizer - for low-moisture bonding
  • Strawboard production - rollers + heaters
  • Rubber micronizer - freezing [3] - chunks are frozen then high-velocity shredded.
  • Freeze drying
  • Dehydration

Fittings

  • Metal
  • Plastic
  • High pressure

Fiber

  1. Weaving - clothing, braids
  2. Wire twisting

Material Feed

  • Rollers - steel rolling
  • Rollers - normal conveyors
  • Roller mill for powders - 3-roll roller
  • Wire feed (welder, alloying)
  • Wire feed - 3D printing filament
  • Auger construction set
  • Centrifugal pump/blower
  • Diaphragm Pump
  • Cryogenic pump
  • High pressure plunger or piston pump - water jetting. Plunger pump goes up to 30,000 psi.[4]

Heat

Outcomes: heaters, furnaces, ovens. Part of Materials - heat systems.

  • Aluminum melting heater
  • High temperature build chamber
  • Pottery kiln
  • Refractory materials - from gypsum, cement
  • Rotary lime kiln for cement production

Safety Gear

Outcomes: eye, head, skin, breath, sound protection, force protection, cut protection. Includes respiration

  1. Mouth/nose faceplate
  2. Face mask
  3. Various options of view window: clear, dark, color-selective, welding, impact resistance
  4. Eyeglass modules
  5. Filter module - for face mask, PAPR, air filter in general
  6. Blower
  7. helmet - breather
  8. Helmet - protective
  9. Hardhat
  10. Head-fitting rotary-adjustable buckle
  11. Pneumatics modules - solenoids, pressure gauges, tubing

More 4/10

More Modules:

  1. Poppet Valve
  2. Pressure relief valve - teh equivalent of a transistor in electricity
  3. Pressure tank - Vessels and process control
  4. Water/Pressure tank - same as above
  5. Ajustable pressure relief

Sensors

  1. Phase sensor - electricity
  2. Display module - LCD screen
  3. PV cell


Materials

  • Glass from powder
  • China clay - porcelain
  • Continuous clay extruder from powder
  • Laser module - solid state or CO2
  • Wire coating module
  • Wire weaving module
  • Universal Axis

Stepper Motor

  • Planetary geardown
  • Strawboard heated roller
  • Graphite brush - for brushed contacts
  • Live hydraulic swivel
  • Track module
  • Cotter pin module
  • Spring steel alloying
  • Ferrochrome alloying for stainless steel - only $1/lb?

3D Printing

  • Refractory Lining production
  • Insulated chamber

Universal Rotors

  • Vaccuum Pump
  • Cryo Pump
  • Auger
  • Trancher track: sprocket
  • Chain - heavy duty for tracks, light for chainsaw and bike

Automotive

  • Spark plug
  • Poppet valve
  • Bump valve
  • Ball check valve
  • Cylinder honing - take sch 80 pipe and go from there.

Ball bearing

  • Grinder
  • Hardening - carburize
  • Hardening - hardfacing
  • Powdering rubber
  • Powdering wood

Hi Tech

  • Liquid crystals

PPE

  • Visor sauare for mask - shading, clear, darkening (welding)
  • Glasses - cellulose acetate
  • Small face filters
  • Large Papr filter
  • Larger house filter
  • Melt-blown plastic machine

Metallurgy

  • Graphite reusable metal casting crucibles - zone refining of metal-to-ingot
  • 3" billet production, 3"x8' is minimum. Weight - 2lb/inch. 200 lb is 100 inch - or 8'. That is what we need.

Nano

  • Fiberglass reinforcement
  • Kevlar?
  • Carbon fiber?

Medical

  • NMR - magnetic field detection - by electromagnetic rad
  • X-ray
  • Negative Pressure Rooms
  • Non-Contact Thermometers
  • Ventilator Machines - construction set
  • Oxygen Concentrators - from zeolites
  • Geopolymers
  • Pulse Oximeters
  • Non-Heated Humidifier (aka Cool-Mist)
  • Laryngoscopes
  • Infusion Pumps
  • Small centrifuge

Links

  1. Open Source Technology Pattern Language
  2. Modules
  3. Technology Map
  4. Construction Sets