D3D v20.04 Software: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Firmware= *Firmaware goes back from the 2-wire endstops to 3-wire endstops with indicator light to make fabrication easier. File:Marlin_D3D_Pro_v1.0.zip no longer works....") |
No edit summary |
||
| Line 3: | Line 3: | ||
*New firmware builds upon the last version with 3-wire endstops - from [[3D Printer Genealogy]] - the first version that had 2-wire endstops was [[D3D v19.02]]. Change log from v19.12 firmware states " Change log: endstop_reversing was reversed on X and Y compared to former versions". Thus, chaning this only would suffice - reversing back to the opposite of [[File:Marlin_D3D_Pro_v1.0.zip]] | *New firmware builds upon the last version with 3-wire endstops - from [[3D Printer Genealogy]] - the first version that had 2-wire endstops was [[D3D v19.02]]. Change log from v19.12 firmware states " Change log: endstop_reversing was reversed on X and Y compared to former versions". Thus, chaning this only would suffice - reversing back to the opposite of [[File:Marlin_D3D_Pro_v1.0.zip]] | ||
*New file: [[File:Marlin_D3D_Pro_2.zip]] | *New file: [[File:Marlin_D3D_Pro_2.zip]] | ||
=Links= | |||
*[[D3D v20.04]] | |||
Revision as of 06:32, 20 April 2020
Firmware
- Firmaware goes back from the 2-wire endstops to 3-wire endstops with indicator light to make fabrication easier. File:Marlin D3D Pro v1.0.zip no longer works.
- New firmware builds upon the last version with 3-wire endstops - from 3D Printer Genealogy - the first version that had 2-wire endstops was D3D v19.02. Change log from v19.12 firmware states " Change log: endstop_reversing was reversed on X and Y compared to former versions". Thus, chaning this only would suffice - reversing back to the opposite of File:Marlin D3D Pro v1.0.zip
- New file: File:Marlin D3D Pro 2.zip