Biocrude: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Added a link to a relevant Scientific Paper)
(Added some more information)
 
(9 intermediate revisions by the same user not shown)
Line 12: Line 12:
=="Raw"==
=="Raw"==
*Supposedly has some issues with [[Catalyst Poisoning]]
*Supposedly has some issues with [[Catalyst Poisoning]]
*From "DEMETALLATION OF BIOCRUDE FROM HYDROTHERMAL LIQUEFACTION OF MICROALGAE"
** "In addition to heteroatoms such as N, O, and S in algal biocrude oil, there is also the presence of metals. The most common metals in algal crude oil are Na, Fe, Ca, Cu, K, Mg, Ni, Zn, Mn, Cr, Al, with concentration ranging from a few ppm to a few thousand ppm. Conversely, the most abundant and detrimental metals in petroleum crude oil are Ni and V."


==Processing Methods Which Help==
==Processing Methods Which Help==
*Could maybe use "sweetening" as a name for this, this is used for sulfur removal in-industry?
*Terms seem to be
*Most seem to be under the category of "Hydrotreating" mainly:
**"De-Salting" Supposedly common in refineries for existing fossil crude oil, essentially just a "water wash" then seperation of the water
**Hydrodesulfurization
**Hydrodemetallization
*Supposedly "Oxygen Content" is another issue, need to look into this
*[https://etda.libraries.psu.edu/files/final_submissions/19716 "DEMETALLATION OF BIOCRUDE FROM HYDROTHERMAL LIQUEFACTION OF MICROALGAE" ]
*[https://link.springer.com/article/10.1007/s12209-017-0051-4 "Review of Denitrogenation of Algae Biocrude Produced by Hydrothermal Liquefaction" ]
*[https://link.springer.com/article/10.1007/s12209-017-0051-4 "Review of Denitrogenation of Algae Biocrude Produced by Hydrothermal Liquefaction" ]
*[https://pubs.acs.org/doi/10.1021/acs.energyfuels.7b03144 "Metals and Other Elements in Biocrude from Fast and Isothermal Hydrothermal Liquefaction of Microalgae" ] (May fit better in composition?, it only is talking about contaminants that could foul catalysts however, not specific hydrocarbons)
*[https://pubs.acs.org/doi/10.1021/acs.energyfuels.7b03144 "Metals and Other Elements in Biocrude from Fast and Isothermal Hydrothermal Liquefaction of Microalgae" ] (May fit better in composition?, it only is talking about contaminants that could foul catalysts however, not specific hydrocarbons)
*[https://www.osti.gov/pages/servlets/purl/1415271 "Influence of Process Conditions and Interventions on Metals Content in Biocrude
from Hydrothermal Liquefaction of Microalgae" ]


=Composition=
=Composition=
Line 29: Line 39:
*[https://link.springer.com/article/10.1007/s13399-020-00795-x "Evaluation of bio-crude oil through hydrothermal liquefaction of microalgae-bacteria consortium grown in open pond using wastewater" ]
*[https://link.springer.com/article/10.1007/s13399-020-00795-x "Evaluation of bio-crude oil through hydrothermal liquefaction of microalgae-bacteria consortium grown in open pond using wastewater" ]
*[https://www.longdom.org/proceedings/review-of-algae-hydrothermal-liquefaction-56722.html "Review of algae hydrothermal liquefaction" ] (2017)
*[https://www.longdom.org/proceedings/review-of-algae-hydrothermal-liquefaction-56722.html "Review of algae hydrothermal liquefaction" ] (2017)
*
*[https://www.nrel.gov/docs/fy15osti/64673.pdf "Prediction of microalgae hydrothermal liquefaction products from feedstock biochemical composition" ] (Modeling will be very useful, especially given the likely use of diverse feedstocks rather than a single strain of algae, or fuel crop (unlike some plants/business models reffered to in many papers) )
*[https://www.researchgate.net/publication/315728416_Experimental_Investigations_of_Physical_and_Chemical_Properties_for_Microalgae_HTL_Bio-Crude_Using_a_Large_Batch_Reactor "Experimental Investigations of Physical and Chemical Properties for Microalgae HTL Bio-Crude Using a Large Batch Reactor" ]


=Internal Links=
=Internal Links=
Line 35: Line 46:


=External Links=
=External Links=
*
*[https://www.sciencedirect.com/science/article/abs/pii/S0960148119311048 "The storage stability of biocrude obtained by the hydrothermal liquefaction of microalgae" ]


[[Category: Bio-Petrochemistry]] [[Category: Biofuel]]
[[Category: Bio-Petrochemistry]] [[Category: Biofuel]]

Latest revision as of 05:36, 3 December 2020

Basics

  • A viscous liquid resembling crude petrolium oil in most respects
  • Produced from biomass
  • Can be aquired from a variety of methods (see HTL )
  • Some forms of Pyrolysis Oil can be considered Bio-Crude, but their compositions are not as broad in most cases (research needed on this)

Used For

  • Burning as a fuel Itself
  • Refining it into Bio-Petrochemicals and other derivatives (Biofuels such as Bio Gasoline, Biodiesel, etc) using a Biorefinery and/or Biocrude Refinery

Catalyst Compatibility

"Raw"

  • Supposedly has some issues with Catalyst Poisoning
  • From "DEMETALLATION OF BIOCRUDE FROM HYDROTHERMAL LIQUEFACTION OF MICROALGAE"
    • "In addition to heteroatoms such as N, O, and S in algal biocrude oil, there is also the presence of metals. The most common metals in algal crude oil are Na, Fe, Ca, Cu, K, Mg, Ni, Zn, Mn, Cr, Al, with concentration ranging from a few ppm to a few thousand ppm. Conversely, the most abundant and detrimental metals in petroleum crude oil are Ni and V."

Processing Methods Which Help

from Hydrothermal Liquefaction of Microalgae" ]

Composition

Internal Links

External Links