Open Source 3 Axis Wire-Cut EDM Machine: Difference between revisions
Jump to navigation
Jump to search
(Added some more information) |
|||
| Line 25: | Line 25: | ||
=Existing Open Source Designs= | =Existing Open Source Designs= | ||
* | == "Action BOX" == | ||
*[https://www.youtube.com/watch?v=2ewSbI52ICc A Video by the YouTube Channel "Action BOX" Titled "DIY Wire EDM Machine | Cut through anything (conductive) with our CNC Electrical Discharge Machining" ] | |||
=Minimum Viable Product= | =Minimum Viable Product= | ||
Revision as of 22:51, 9 January 2022
Basics
- Part of the Open Source Digital Fabrication Construction Set
- An electric discharge machining device (EDM)
- Uses a thin wire, and high voltage electricity to precicely erode away material using the resulting plasma
- Requires a wire feeding mechanism
- Good explanation + Demo in this video, at 13:26
Used For
- According to This :
- Ideal for low volume quantities of parts that require tight manufacturing tolerances.
- Extrusion dies.
- Blanking punches.
- Metal and tool fabrication.
- Also Really Small Stuff as shown in this video at 13:26
Industry Standards
Makino
MC Machines
Sodick
Existing Open Source Designs
"Action BOX"
Minimum Viable Product
Basic Design
Housing
- Holds all the below together
Controller
- Controlls all components
- Rasberry Pi + Arduino + Any neccissary sheilds?
- Connects to IO Panel and any external controls (PC, Server, WWW, etc)
IO Panel
- Touchscreen
- Optional Mouse + Keyboard
Fluid Pump
- Recirculats the dielectric fluid
- Does this to promote circulation
- Also provides pressure to debris clearing jets
Fluid Filter
- Cleans Debris (Such as Metal Dust) Out of the Dielectric Fluid
- Hydrocyclone + Standard Oil/Water Filter Cartridge
- Should also include sensors before and after filtration to determine fluid + filter effectiveness
Work Surface
- The Workpiece is attached to this
Fluid Bath
- Allows the Work Surface and Work Piece to be submerged in dielectric fluid
- Could be permanent or a slide up design
CNC Gantry
- Holds and Moves the Toolpiece
- Standard D3D Axis?
Toolpiece
- A device resembling two fingers holding dental floss
- Works with the power supply
Wire Feeder
- A device with two wire spools (one for feeding new wire thru and one for receiving spent wire)
- Also need to design/find the mechanism for shooting the string to the other side to remove the need for manual wire threading
Fluid Resevoir
- Holds Spare Fluid
- Also holds the contents of the fluid bath when not in use