D3D Universal v21.06 3D CAD: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
 
(15 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{Hint| Change from [[D3D Universal 2]] is integrating the Z motor piece into base and splitting base into 3 parts for printability on another D3D Universal. Files include a one-piece base that still needs a 12" bed for printing, but this is broken into 2 pieces in the next files. See FreeCAD by [[Vincenzo]]}}


*Complete as one piece - [[File:baseonepiece.fcstd]]
*Complete as one piece - [[File:baseonepiece.fcstd]]
Line 12: Line 13:




[[File:uni3mainassy.png|100px]][[File:uni2basepart3.png|100px]][[File:uni2basepart2.png|100px]][[File:uni2idlerbasetrimmed.png|100px]][[File:uni2idlerbase.png|100px]][[File:uni2motorbase.png|100px]]
[[File:D3D_Universal_3_v.21.06.png|100px]][[File:uni3mainassy2.png|100px]][[File:uni3mainassy.png|100px]][[File:uni2basepart3.png|100px]][[File:uni2basepart2.png|100px]][[File:uni2idlerbasetrimmed.png|100px]][[File:uni2idlerbase.png|100px]][[File:uni2motorbase.png|100px]]




Line 18: Line 19:


<gallery perrow=6>
<gallery perrow=6>
uni3mainassy.png|'''*Part 1 assembly with motorpiece.''' - FreeCAD - [[File:basewithmotorside.fcstd]] - STL - [[File:uni2basepart2.stl]]
 
endclosure.png|'''End closure''' - FreeCAD - [[File:endclosure.fcstd]] - STL - [[File:endclosure.stl]]
 
 
uni3mainassy2.png|'''Main base assembly''' - FreeCAD - [[File:uni3mainassy.fcstd]] - STL - [[File:uni3mainassy.stl]]
 
uni3mainassy.png|'''Part 1 assembly with motorpiece.''' - FreeCAD - [[File:basewithmotorside.fcstd]] - STL - [[File:uni2basepart1.stl]]
 
uni2basepart3.png|'''Universal 3 Controller Part of Base''' - FreeCAD - [[File:Upperpartofbase.fcstd]] - STL - [[File:uni2basepart2.stl]]


uni2idlerbase.png|'''Universal 3 Idler Base''' - FreeCAD - [[File:uni2idlerbase.fcstd]] - STL - [[File:uni2idlerbase.stl]]
uni2idlerbase.png|'''Universal 3 Idler Base''' - FreeCAD - [[File:uni2idlerbase.fcstd]] - STL - [[File:uni2idlerbase.stl]]


uni2motorbase.png|'''Universal 3 Motor Base''' - FreeCAD - [[File:uni2motorbase.fcstd]] - STL - [[File:uni2motorbase.stl]]
uni2motorbase.png|'''Universal 3 Motor Base''' - FreeCAD - [[File:uni2motorbase.fcstd]] - STL - [[File:uni2motorbase.stl]]
</gallery>
<gallery perrow=6>
File:D3D_Universal_3_v.21.06.png| '''D3D Universal 3 Assembly.''' [[File:D3D Universal 3 v.21.06 Link.FCStd]]. Full file on Gitlab - [https://gitlab.com/calligarov/d3d-universal-3-v21.06/-/blob/main/D3D%20Universal%203%20v.21.06.FCStd]
File:universal2assy8.png|'''D3D Universal v2 Assembly.''' [[File:universal2assy.fcstd]]. Full file on Gitlab - [https://gitlab.com/marcin_ose/d3d-universal-v2/-/blob/master/uni_remake.fcstd]
File:New spoolholder.png| '''D3D Universal Rework Spool Holder '''- FreeCAD - [[File:D3D Universal Spool Holder.fcstd]]. STL - [[File:D3D Universal Spool Holder.stl]]
File:bedclamp2.png|Bed clamp. [[File:bedclamp.fcstd]]. STL - [[File:bedclamp.stl]]
File:beltpinch6.png|'''Beltpinch.''' [[File:beltpinch.fcstd]]. STL: [[File:beltpinch.stl]]
File:newbeltpeg4.png|'''New belt peg.''' [[File:newbeltpeg.fcstd]]. STL: [[File:newbeltpeg.stl]]
File:uni2bedmountcarriage4.png|'''D3D Universal 2 bed mount carriage.''' [[File:uni2bedmountcarriage.fcstd]]. STL: [[File:uni2bedemountcarriage.stl]]. Update with set screw correction - Gitlab - [https://gitlab.com/marcin_ose/d3d-universal-v2/-/blob/master/update_bed_carriage.fcstd]
File:ztox_Complete.png|'''D3D Universal Z to X Carriage.''' Overall: [[File:ztox.fcstd]] initial, and [https://gitlab.com/marcin_ose/d3d-universal-v2/-/blob/master/z_to_x.fcstd Gitlab final].  Carriage part - [[File:ztox_Carriage.fcstd]]. Motor part - [[File:ztox_Motor.fcstd]]. STL - [[File:ztox.stl]]
File:newclosure.png|'''Carriage closure.''' [[File:carraigeclosure.fcstd]]. STL - [[File:carriageclosure.stl]]
File:carriageholeswidened.png|Simplified Universal Axis carriage: [[File:simplified_carriage_side.fcstd]]. STL - [[File:Simplified_carriage_side.stl]]
File:idlerplugged.png|'''One piece idler.''' - FreeCAD -[[File:newidler.fcstd]]. STL - [[File:newidler.stl]]
File:bespacer.png|'''Bed spacer.''' File: [[File:bedspacer.fcstd]] [[File:bedspacer.stl]]
File:updatedmotor.png|'''Simplified Universal Axis Motor Side''' - FreeCAD -[[File:simplified_motor_side.fcstd]]. Full size at Gitlab - [https://gitlab.com/marcin_ose/universal-axis-2/-/blob/master/new_motor_piece.fcstd]. STL - [[File:simplified motor side.stl]]
File:LCDmountupdatechamf.png|'''LCD Mount.''' [[File:lcdmount.fcstd]]. STL  - [[File:lcdmount.stl]].
File:autoparallelredone.png|'''Auto parallel piece.''' Can be used on Y for auto parallel, Z for equal bottoming. And for holding endstops. File: [[File:autoparallel.fcstd]] [[File:autoparallel.stl]]
File:remakeelectronics.png|'''D3D Universal electronics.''' [[File:unielectronics.fcstd]].
File:remakezaxis.png|'''D3D Universal Z axis.''' [[File:unizaxis.fcstd]].
File:remakeyaxis.png|'''D3D Unviersal Y axis.''' [[File:uniyaxis.fcstd]].
File:remakexaxis.png|'''D3D Universal X axis.''' [[File:unixaxis.fcstd]].
File:endstop.jpg|'''Endstop.''' - FreeCAD - [[File:D3D End Stop Switch.fcstd]].
File:ScrewM6x18.png| '''Screw M6x18''' [[File:ScrewM6x18.FCStd]].
File:SetScrewM6x10.png| '''Set Screw M6x10''' [[File:SetScrewM6x10.FCStd]].
File:R7SLampHolder.png| '''Lamp holder''' for R7S halogen lamps [[File:R7SLampHolder.FCStd]].
File:ScrewM3x25.png| '''Screw M3x25''' [[File:ScrewM3x25.FCStd]].
File:R7SLamp.png| '''R7S Halogen lamp''' [[File:R7SLamp.FCStd]].
File:ScrewM6x25.png| '''Screw M6x25''' [[File:ScrewM6x25.FCStd]].
File:NutM6.png| '''Nut M6''' [[File:NutM6.FCStd]].
File:ScrewM3x8.png| '''Screw M3x8''' [[File:ScrewM3x8.FCStd]].
File:ScrewM3x18.png| '''Screw M3x18''' [[File:ScrewM3x18.FCStd]].
File:ScrewM3x30.png| '''Screw M3x30''' [[File:ScrewM3x30.FCStd]].
File:SelfTappingScrewM3x13.png| '''Self Tapping Screw M2.9x13''' [[File:SelfTappingScrewM3x13.FCStd]].
File:ScrewM4x30.png| '''Screw M4x30''' [[File:ScrewM4x30.FCStd]].
File:D3DUniversal3WoodenBase.png| '''Wooden Base''' [[File:D3DUniversal3WoodenBase.fcstd]].
File:LowerBedPlate.png| '''Lower Bed Plate''' [[File:LowerBedPlate.FCStd]].
File:EMTConduit.png| '''EMT Conduit''' for Heated Bed [[File:EMTConduit.fcstd]].
File:BedRod.png| '''Bed Holding Rod''' [[File:BedRod.fcstd]].
File:YAxisRod.png| '''Y Axis Rod''' [[File:YAxisRod.fcstd]].
File:Pulley.png| '''GT2 Belt Pulley''', 20 teeth, 6mm wide, 5mm bore [[File:Pulley.fcstd]].
File:XZAxisRod.png| '''X Axis''' and '''Z Axis Rod''' [[File:XZAxisRod.fcstd]].
File:SpoolRod.png| '''Spool Holding Rod''' [[File:SpoolRod.fcstd]].
File:RJ4JP 01 08LinearBearings.png| '''RJ4JP-01-08 Linear Bearings''' [[File:RJ4JP-01-08LinearBearings.fcstd]].
File:MF126ZZBearings.png| '''MF126ZZ Bearings''' [[File:MF126ZZBearings.fcstd]].
File:YBelt.png| '''Y Axis Belt''' [[File:YBelt.FCStd]].
File:D3DUniversal3CarbonFiberStrip.png| '''Carbon Fiber Strip''' [[File:D3DUniversal3CarbonFiberStrip.FCStd]].
File:D3DUniversal3CarbonFiberBlanket.png| '''Carbon Fiber Blanket''' [[File:D3DUniversal3CarbonFiberBlanket.FCStd]].
File:PEISurface.png| '''PEI Printing Surface''' [[File:PEISurface.fcstd]].
File:DoubleSidedTape.png| '''Double Sided Adhesive Tape''' [[File:DoubleSidedTape.fcstd]].
File:UpperBedPlate.png| '''Upper Bed Plate''' [[File:UpperBedPlate.FCStd]].
File:XZBelt.png| '''X Axis''' and '''Z Axis Belt''' [[File:XZBelt.FCStd]]
</gallery>
==Extruder==
From [[D3D_Universal_3D_CAD#Printer_Extruder_-_Universal_Gearless_Extruder]]. Missing: Volcano nozzle.
<gallery perrow=6>
File:Finalextruder.png|'''Extruder assembly''' - Gitlab - [https://gitlab.com/marcin_ose/d3d-universal/blob/master/SimpleExtruder.FCStd]. FreeCAD - [[File:simpleextruderassy.fcstd]]
File:mainextruderpart.png|'''Main extruder part.''' - Gitlab - [https://gitlab.com/marcin_ose/d3d-universal/blob/master/ExtruderMotorBracket.FCStd]. FreeCAD - [[File:mainextruderpart.fcstd]]. STL - [[File:extruder_main.stl]]
File:ExtrCoolSensPltr.png|'''Extruder Active Cooling with Sensor Mount + Plotter Mount''' [[File:ExtrCoolSensPlt.fcstd]]. STL - Cooling/Sensor/Plotter Mount - [[File:ExtrCoolSensPlt.stl]]
File:tensioner.png|'''Spring tensioner''' -[[File:SpringTensioner.FCStd]]. STL - [[File:Tensioner.stl]]
File:extruderspring.png|Extruder Spring for [[Simple Extruder]]. Buy + spec - [https://www.mcmaster.com/94125k616]. FreeCAD file - [[File:extruderspring.fcstd]]
File:HeatSinkJig.png|'''Jig to cut the heat sink''' -[[File:HeaterSinkJig.FCStd]]
File:fixedsink.png|'''heat sink''' -[[File:HeatSink.FCStd]]. Technical drawing - [[File:Heatsinktechdraw.FCSTD]]
File:Heatsinktechdraw.jpg|'''heat sink''' - Technical drawing.
File:volcanoheaterblock.png|'''Volcano heater block'''. [[File:volcanoheaterblock.fcstd]].
File:5015blower.jpg|[[File:5015blower.fcstd]] '''5015 Blower''' - positionally correct for D3D Universal.
File:8mmsensor.jpg|8 mm sensor. Download - [[File:8mmsensor.fcstd]]
File:608Bearing.png|608 skateboard 8x22x7 mm Bearing. Download - [[File:608Bearing.FCStd]]
File:40x10fan.png|'''40x10mm fan''' [[File:40x10fan.fcstd]]
File:steppermotor.png| '''Stepper Motor'''[[File:steppermotor.fcstd]]
File:steppermotor2.png| '''Stepper Motor from Faceplate'''[[File:Nema17face.fcstd]]
File:drivegear.png| '''Drive Gear'''[[File:drivegear.fcstd]]
File:3heatbreak.png| '''3 mm heat break.'''[[File:3heatbreak.fcstd]]. Re-Source - [https://gitlab.com/marcin_ose/titan-aero-cad/blob/master/Titan_Aero_Mirrored.fcstd]
File:heatsink.png| '''4040 heatsink.'''[[File:heatsink.fcstd]]


</gallery>
</gallery>
Line 28: Line 182:
=Links=
=Links=
*[[D3D Universal v21.06]]
*[[D3D Universal v21.06]]
[[Category: D3D]]

Latest revision as of 16:34, 10 January 2023


HintLightbulb.png Hint: Change from D3D Universal 2 is integrating the Z motor piece into base and splitting base into 3 parts for printability on another D3D Universal. Files include a one-piece base that still needs a 12" bed for printing, but this is broken into 2 pieces in the next files. See FreeCAD by Vincenzo

Part Library - D3D Universal 3

Visual History:


D3D Universal 3 v.21.06.pngUni3mainassy2.pngUni3mainassy.pngUni2basepart3.pngUni2basepart2.pngUni2idlerbasetrimmed.pngUni2idlerbase.pngUni2motorbase.png


Gallery:

Extruder

From D3D_Universal_3D_CAD#Printer_Extruder_-_Universal_Gearless_Extruder. Missing: Volcano nozzle.

Links

Retrieved from "https://wiki.opensourceecology.org/index.php?title=D3D_Universal_v21.06_3D_CAD&oldid=279153"