3D Printing Filament: Difference between revisions
Jump to navigation
Jump to search
m (Marked some dead links for necromancy) |
|||
| (7 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
=OSE Choice= | =OSE Choice= | ||
*Standard for OSE - [https://www.matterhackers.com/store/l/300mm-pla-filament-black-1-kg/sk/MSEWRUAW?rcode=GAT9HR&gclid=EAIaIQobChMIupmZy7aC6wIVA6SzCh3Llwa0EAQYASABEgLzoPD_BwE]. 2.85 mm preferred | *Standard for OSE - [https://www.matterhackers.com/store/l/300mm-pla-filament-black-1-kg/sk/MSEWRUAW?rcode=GAT9HR&gclid=EAIaIQobChMIupmZy7aC6wIVA6SzCh3Llwa0EAQYASABEgLzoPD_BwE]. 2.85 mm preferred. 1.75 will work but not as well, depending on use case. | ||
*Standard TPU for OSE - [https://www.amazon.com/gp/product/B078YNWLS5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1] or search accordingly. Definitely 2.85 mm, not 1.75 mm. | *Standard TPU for OSE - [https://www.amazon.com/gp/product/B078YNWLS5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1] (Dead Link) (No Saved Version on [[The Wayback Machine]] , could potentially track down the brand via an old spool's label?) or search accordingly. Definitely 2.85 mm, not 1.75 mm. | ||
= Links = | |||
*http://reprap.org/wiki/Feeding_filament | |||
*[[Composite FDM Filaments]] | |||
*[[Lyman Filament Extruder]] | |||
*[[Filament Extruder]] | |||
=More= | |||
*[[Largest 3D Printing Filament Spool]] | |||
*[[Open Source Filament Maker]] | |||
*[[Filament Swapping Devices]] | |||
*[[Flexible Filaments]] | |||
*[[TPU]] | |||
*[[Antibacterial Filament]] | |||
*[[Acetal Filament]] | |||
*[[Why a Gearless Extruder Works for 3 mm Filament]] | |||
*[[PLA Filament Sourcing]] | |||
*[[Marlin Filament Width Sensor]] | |||
*[[German Filament Extruder]] | |||
*[[Recycled Filament]] | |||
*[[Lyman Filament Maker Calculations]] | |||
*[[Abrasive 3D Printing Filament]] | |||
*[[Wood 3D Printing Filament]] | |||
*[[Porous Rubber Filament]] | |||
*[[Cellulose 3D Printing Filament]] | |||
*[[Lyman Filament Extruder]] | |||
*[[High Temperature Filaments]] | |||
*[[PEI Filament]] | |||
[[Category: 3D Printing]] [[Category: Materials]] | |||
Latest revision as of 23:42, 26 September 2023
OSE Choice
- Standard for OSE - [1]. 2.85 mm preferred. 1.75 will work but not as well, depending on use case.
- Standard TPU for OSE - [2] (Dead Link) (No Saved Version on The Wayback Machine , could potentially track down the brand via an old spool's label?) or search accordingly. Definitely 2.85 mm, not 1.75 mm.
Links
- http://reprap.org/wiki/Feeding_filament
- Composite FDM Filaments
- Lyman Filament Extruder
- Filament Extruder
More
- Largest 3D Printing Filament Spool
- Open Source Filament Maker
- Filament Swapping Devices
- Flexible Filaments
- TPU
- Antibacterial Filament
- Acetal Filament
- Why a Gearless Extruder Works for 3 mm Filament
- PLA Filament Sourcing
- Marlin Filament Width Sensor
- German Filament Extruder
- Recycled Filament
- Lyman Filament Maker Calculations
- Abrasive 3D Printing Filament
- Wood 3D Printing Filament
- Porous Rubber Filament
- Cellulose 3D Printing Filament
- Lyman Filament Extruder
- High Temperature Filaments
- PEI Filament