Latest revision as of 23:42, 26 September 2023

OSE Choice

Standard for OSE - [1]. 2.85 mm preferred. 1.75 will work but not as well, depending on use case.
Standard TPU for OSE - [2] (Dead Link) (No Saved Version on The Wayback Machine , could potentially track down the brand via an old spool's label?) or search accordingly. Definitely 2.85 mm, not 1.75 mm.

@@ Line 2: / Line 2: @@
 =OSE Choice=
 *Standard for OSE - [https://www.matterhackers.com/store/l/300mm-pla-filament-black-1-kg/sk/MSEWRUAW?rcode=GAT9HR&gclid=EAIaIQobChMIupmZy7aC6wIVA6SzCh3Llwa0EAQYASABEgLzoPD_BwE]. 2.85 mm preferred. 1.75 will work but not as well, depending on use case.
-*Standard TPU for OSE - [https://www.amazon.com/gp/product/B078YNWLS5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1] or search accordingly. Definitely 2.85 mm, not 1.75 mm.
+*Standard TPU for OSE - [https://www.amazon.com/gp/product/B078YNWLS5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1] (Dead Link) (No Saved Version on [[The Wayback Machine]] ,  could potentially track down the brand via an old spool's label?) or search accordingly. Definitely 2.85 mm, not 1.75 mm.
 = Links =
@@ Line 20: / Line 20: @@
 *[[Why a Gearless Extruder Works for 3 mm Filament]]
 *[[PLA Filament Sourcing]]
-*[[Link title]]
+*[[Marlin Filament Width Sensor]]
-*[[Link title]]
+*[[German Filament Extruder]]
-*[[Link title]]
+*[[Recycled Filament]]
-*[[Link title]]
+*[[Lyman Filament Maker Calculations]]
-*[[Link title]]
+*[[Abrasive 3D Printing Filament]]
-*[[Link title]]
+*[[Wood 3D Printing Filament]]
-*[[Link title]]*[[Link title]]
+*[[Porous Rubber Filament]]
-*[[Link title]]
+*[[Cellulose 3D Printing Filament]]
-*[[Link title]]
+*[[Lyman Filament Extruder]]
-*[[Link title]]
+*[[High Temperature Filaments]]
-*[[Link title]]
+*[[PEI Filament]]
+[[Category: 3D Printing]] [[Category: Materials]]