Metal Roofing: Difference between revisions
Jump to navigation
Jump to search
(Created Page + Added Basic Sections/Info) |
(→Cost) |
||
(8 intermediate revisions by 2 users not shown) | |||
Line 6: | Line 6: | ||
*They can become dented by hail, although this isn't a structural issue, just an aesthetic one | *They can become dented by hail, although this isn't a structural issue, just an aesthetic one | ||
*Also they are less prone to Ice dams / snow buildup due to shedding snow better (citation needed on this) | *Also they are less prone to Ice dams / snow buildup due to shedding snow better (citation needed on this) | ||
*Also easily recyclable, unlike most other roofing options | |||
= | =Cost= | ||
* | *Standard off-the-shelf big box store is about $1/sf [https://www.menards.com/main/skusummary.html?primaryMeas=96.0&secondaryMeas=36.0&pid=1444448586926&cid=5717]. Actual .0142" minimum thickness before painting .0165" nominal thickness after painting (29 gauge) | ||
= | =Links= | ||
* | *[[Cost Per Square Foot]] | ||
*[https://en.wikipedia.org/wiki/Metal_roof The Wikipedia Page on Metal Roofing] | |||
[[Category: Housing and construction]] | |||
Latest revision as of 22:47, 21 July 2024
Basics
- The use of Metal Sheeting for roofing, rather than Shingle Roof , Green Roof , or Tile Roof
- More Simple/Cheap to install than Tile Roofs, but still more durable than Shingle Roofs
- May be more durable than both, need to look into this
- Only real issue (Short of corrosion, if not using some form of coating / Anodization / Galvanization , or even just a Sacrificial Anode ) is noise when rain hits the roof, although there are noise reducing layers/strategies for this
- They can become dented by hail, although this isn't a structural issue, just an aesthetic one
- Also they are less prone to Ice dams / snow buildup due to shedding snow better (citation needed on this)
- Also easily recyclable, unlike most other roofing options
Cost
- Standard off-the-shelf big box store is about $1/sf [1]. Actual .0142" minimum thickness before painting .0165" nominal thickness after painting (29 gauge)