Leo Log: Difference between revisions
Leo Riveron (talk | contribs) No edit summary |
Leo Riveron (talk | contribs) No edit summary |
||
| (7 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
=Saturday, August 3, 2013= | |||
Synced up with John.<br> | |||
===TODO:=== | |||
Familiarize myself with John's log and what others are working on with the [[HydraFabber]]. | |||
=Thursday, August 1, 2013= | |||
Updated the [[File:Spindle Mount.skp]] model with appropriate components and groups. | |||
=Saturday, July 27, 2013= | |||
Synced up with John and Marcin. | |||
===TODO:=== | |||
* Take Spindle Mount file and group appropriately<br> | |||
* Right click part > convert to component<br> | |||
* The explosion of the spindle<br> | |||
NOTE: Need to create another mount for the Laser. | |||
=Friday, July 12, 2013= | |||
Made the [[File:Spindle Mount.skp]] model in Sketchup. | |||
=Thursday, July 11, 2013= | =Thursday, July 11, 2013= | ||
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements: | Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements: | ||
| Line 16: | Line 41: | ||
The center of all 3 holes are .866" from the back of the mount. | The center of all 3 holes are .866" from the back of the mount. | ||
The width of the mount is 1.339" (or 39mm). | The width of the mount is 1.339" (or 39mm). | ||
The width of each piece is .236" (or 6mm). | |||
===TODO: Build model in Sketchup=== | ===TODO: Build model in Sketchup=== | ||
| Line 30: | Line 56: | ||
* Length of rigid coupler: ?? | * Length of rigid coupler: ?? | ||
===TODO: Need to contact | ===TODO: Need to contact Ilan (or McMaster and SDP/SI) to get specs=== | ||
=Sat, June 29, 2013= | =Sat, June 29, 2013= | ||
Latest revision as of 19:13, 3 August 2013
Saturday, August 3, 2013
Synced up with John.
TODO:
Familiarize myself with John's log and what others are working on with the HydraFabber.
Thursday, August 1, 2013
Updated the File:Spindle Mount.skp model with appropriate components and groups.
Saturday, July 27, 2013
Synced up with John and Marcin.
TODO:
- Take Spindle Mount file and group appropriately
- Right click part > convert to component
- The explosion of the spindle
NOTE: Need to create another mount for the Laser.
Friday, July 12, 2013
Made the File:Spindle Mount.skp model in Sketchup.
Thursday, July 11, 2013
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements:
Top hole
- Holds DC Motor with OD = 1.083"
- Flush with the bottom of the Motor
Middle hole
- Holds the top part of the Bronze Bushing with OD = 5/8"
- 1.181" below the Top Hole part
Bottom hole
- Holds the bottom part of the Bronze Bushing (^OD = 5/8")
- 1.102" below the Middle hole part
The center of all 3 holes are .866" from the back of the mount. The width of the mount is 1.339" (or 39mm). The width of each piece is .236" (or 6mm).
TODO: Build model in Sketchup
Sat, July 6, 2013
Building the spindle mount.
- OD of flexible spider: 5/8"
- OD of bushing: 5/8"
- OD of rigid coupler: 1/2"
- Length of flexible spider: ??
- Length of bushing: 1 1/2"
- Length of rigid coupler: ??
TODO: Need to contact Ilan (or McMaster and SDP/SI) to get specs
Sat, June 29, 2013
Found parts for the Spindle drawing from MIT
TODO: Build a Sketchup model for the mount using the dimensions from the parts.
Sat, May 18, 2013
Working on quick connect tool mount for HydraFabber. *Please coordinate between John Log, Leo Log, Tim Log, and Nate Log - all work related to HydraFabber.