|
|
| (137 intermediate revisions by 2 users not shown) |
| Line 1: |
Line 1: |
| [https://www.dropbox.com/sh/047ux3krxd7dg9j/AAB37JLxpo0AgtbfV-X-Um9ka?dl=0 My CEB Research DropBox Link]<br/>
| | {{RightTOC}} |
| [[Special:Contributions/Aidan_Williamson|contribs]]<br/> | | |
| | {| |
| | |- |
| | |[[Special:Contributions/Aidan_Williamson|contribs]]<br/> |
| | |
| | |
| Old Logs: | | Old Logs: |
| | *[[Aidan_Williamson_Log_2018-2020]] |
| *[[Aidan_Williamson_Log_2015-2017]] | | *[[Aidan_Williamson_Log_2015-2017]] |
| *[[Aidan_Williamson_Log_2014]] | | *[[Aidan_Williamson_Log_2014]] |
| *[[Aidan_Williamson_Log_2013]] | | *[[Aidan_Williamson_Log_2013]] |
| *[[Aidan_Williamson_Log_2012]] | | *[[Aidan_Williamson_Log_2012]] |
| | |
| | |
| =August 21, 2019=
| |
| Went to "Little Belize" which is a Mennonite community where they have a lumber yard and a hardware store. The hardware store sells some metal. I bought 40' of 1/8" x 1 1/2" angle, some flattened expanded metal, and some 4x4 screen to make a screen for sieving soil for production. I also picked up some 3/4" x 4" x 84" hardwood from the lumber yard for making the sieves. I brought down 12"x12" soil screens from mcmaster to reduce the price of a soil sieve set. The lumberyard has SO MUCH HARDWOOD!!!! SO CHEAP!!! It's incredible. and they let you pick through the reject lumber for free.I got what I need to make the sieves and a workbench for $30 US. And this is hardwood, not some shitty pine. I'll upload some videos of their sawmill. They planed the wood for the sieves for me. I will start making them soon.
| |
| | |
| Spent the rest of the day testing power tools. Tablesaw motor is melted at the brush housings. I'll attempt to fix with epoxy. We have several working circular saws. Gabi Harrol and Scott set up some tarps for sun protection while working.
| |
| | |
| Adjusting to the heat and sun. It's not much different from Missouri in July but my access to water is different and I'm on other peoples' food schedules and I have an issue with a swollen tonsil that is exacerbated by the amount of talking I have to do. Can't complain though since we're in paradise.
| |
| | |
| While in Little Belize I grabbed a sample of the clayey soil that they use on their roads. It looks more promising than the Marl. Haven't jar tested it yet. I'll need to get a larger sample after I get the sieves going.
| |
| | |
| =August 20, 2019=
| |
| First week in Belize. Internet access for now is a hotspot on my phone. Not enough data to upload multimedia yet. There is wifi available somewhere in the village but I haven't been introduced to that person yet. We arrived in the afternoon on Saturday. Spent Sunday and Monday getting settled and taking care of the basic necessities of life. Brought all of Scott's tools to the worksite at Harrol's house.
| |
| | |
| We successfully unloaded and setup the brickpress and power cube. Arranged them in what I think will be a good workflow. The powercube needed adjustment on the choke cable. The people down here who had tested it had been putting gas down the air intake to start it. I adjusted the cable properly so that the choke comes on when it should and the engine starts without any other intervention. Oil was clean and level looked great. I believe Ram changed it. Hydraulic fluid tank was 3/4 full. Air filter was pristine. Won't need the spare parts for a long time.
| |
| | |
| We hooked up the hydraulics and powered on the brick press with the controller. It didn't seem to be doing what it should be doing. I need to check the setting of the pressure switch to make sure it's not triggering early. The machine seemed to do the RESET procedure properly and repeat every so often. But when I switched to full brick mode it didn't act right. It extended the drawer all the way and then jerked its way back in maybe 1 or 2 second increments. I didn't have my computer handy to check what the machine thought it was doing. I would have to put some serial communications in the code anyway. I don't have a good workspace set up yet so that's the priority right now.
| |
| | |
| One thing Scott wants to do is make the machine work in a manual mode. There is no way to do that right now besides using a jumper wire to give power to the solenoids inside the controller box. I don't see any manual override on the valves. The 2014 solenoids did have a manual override but I don't see it here. I ordered some momentary switches that should arrive next week. Later on I remembered that I should have gotten NC switches (best practice) but the NO ones I got should work.
| |
| | |
| I see that there are spare cylinder (tandem spool) valves down here. They're the Eaton VICKERS brand that Surplus Center sells. I have the hirschmann connectors on order. The issue with these is that they are 3.5 AMP coils. It says 30W on the housing but the catalog says 3.5A. I'll test what it really draws. The relays on the controller are rated for 3A. The relays might work at that current since they're not on for very long. We'll see.
| |
| | |
| Did a jar test on the marl that they build roads with. Marl is a limestone rich soil. It was pretty expansive. Came out to about 5/16" above my scribed line. Just a preliminary test. It may be useable.
| |
| | |
| =August 6, 2019=
| |
| I'm very interested in the pendulum crusher from the previous log entry. After a correspondence with the owner of Parry Building product, I'm convinced this is a rugged design and the output is claimed to be 20kg/min. If we assume 1800kg/m^3 [https://structx.com/Soil_Properties_002.html 1] then it would take 90mins to do a cubic meter or 70 mins per cubic yard. This gives 1.75 blocks per minute, roughly. Slow.
| |
| | |
| =August 2, 2019=
| |
| Clay crushers
| |
| *Pendulum Crusher<br/>
| |
| **<gallery perrow="3">
| |
| File:Pendulum_Crusher_1.png| ITW WORKSHOPS PENDULUM CRUSHER
| |
| File:Pendulum_Crusher_2.png| See right side of image
| |
| File:Pendulum_Crusher_3.png|Now manufactured by Parry Building Products.
| |
| </gallery>
| |
| *Crankshaft crusher:
| |
| **{{YoutubePopup |0w8hwsqdwHk}}
| |
| | |
| =July 31, 2019=
| |
| I ordered all the spare parts I think I may need in Belize. The orders are on page 2 of the Tools & Infrastructure spreadsheet at [[Mader's Machine]]. I didn't buy a spare pressure relief valve nor any spare hoses. Hopefully the relief valve doesn't kick on, doesn't get hot, and doesn't fail. I did find an alternate pressure switch, New Old Stock from eBay. Same logic and same port size.
| |
| | |
| Been thinking about the cylinder drift issue recorded at [[CEB_Controller_v19.01]]. I read that one way to correct the issue would be to use pilot-operated check valves on the press cylinder. These are [[Hydraulic Valve#Pilot_Operated_Check_Valves|$60 from surplus center]] and prevent a cylinder from moving unless powered.
| |
| | |
| I do see what Marcin is talking about with the "motor spools" being higher flow than the "cylinder spools". [https://yuken-usa.com/wp-content/uploads/2014/09/E-Directional-Controls.pdf Yuken] and [http://www.northmanfp.com/SWH-G02.html Northman] both give lower flow rates for tandem(C6) spools vs open center(C3) spools. For Yuken it's about half; for Northman it's about a third less.
| |
| | |
| I know now that motor spools are also called open center spools which is a use of open center that is distinct from the standard open center vs closed center usage. Yes, they're open center but so are tandem valves which connect P to T in center position but block (to the extent that metal seals on metal) flow from the cylinder to tank. Tandem valves should be used in combination with pilot-operated check valves in situations like loader arms so that cylinders only move when the valve is actuated. The pilot op valves would be a safety redundancy.
| |
| | |
| So I propose we add pilot-op check valves on the CEB press for a total of $155. This is less than an upgrade to higher-flow D05 valves and subplate in a tandem configuration. My quoted cost includes the additional hoses needed. I believe the check valves could be screwed right in to the subplate outputs. We would need to add Tees to port the pilot pressure to the valves.
| |
| *Valves: [https://www.surpluscenter.com/Brands/Brand/1-2-NPT-16-GPM-Brand-PC50C-Pilot-Op-Check-Valve-9-8408-50.axd# $122]
| |
| *Hoses: [https://www.surpluscenter.com/Hydraulics/Hydraulic-Hose-and-Hose-Assemblies/Hydraulic-Hose-Assemblies/1-4-x-24-1-4-NPTM-x-1-4-NPTM-SAE-100R17-Hydraulic-Hose-Assembly-3000-PSI-916-1424.axd $14]
| |
| *Tees: [https://www.surpluscenter.com/Hydraulics/Hydraulic-Adapters-Fittings/NPT-to-NPT/NPT-Female---Tee/1-2-x-1-2-x-1-2-NPTF-Tee-9-5605-8-8-8.axd $14]
| |
| *Bushing 1/2 to 1/4: [https://www.surpluscenter.com/Hydraulics/Hydraulic-Adapters-Fittings/NPT-to-NPT/NPT-Female-to-NPT-Male---Bushing/1-2-NPT-To-1-4-NPT-Bushing-9-5406-8-4.axd $4]
| |
| | |
| =July 18, 2019=
| |
| Sketched up a rough outline of an auger-assisted soil crusher. Trying to solve the problem of relying on gravity to meter the dosage of soil and stabilizer. I think a force like that from an auger would help normalize the dosing.
| |
| I'm not crazy about it but it could work. Maybe too expensive.
| |
| | |
| | |
| =July 17, 2019=
| |
| Don't have edit access on [[Soil Mixer 2019|Soil Mixer Design Doc]] so I'll record my thoughts here:
| |
| #What propels the stabilized soil mixture out of the hammermill?
| |
| #Relying on gravity and ratio of areas to dose quantities of soil and earth. This, in my opinion, will be irregular. You would have to be able to change the size of the stabilizer aperture in the field.
| |
| ##Based on pH for lime. Do a sample every so often
| |
| ##Based on color for cement?
| |
| #The raw soil would need to be crushed and dried before it will fall into the drawer in a repeatable way. This kind of defeats the purpose of a hammermill.
| |
| ##I could see this propagating the error we have in block size throughout the system. Relying on the soil to fall into a hole the same way each time. Might double the error, right? Double the random uncertainty in block size. Or give a systematic shifts in error during a shift or certain working condition.
| |
| #An auger system could meter the input of soil and stabilizer in a more controlled way while still using only one actuator (motor instead of cylinder - though maybe it works out to an extra motor). A variable pulley could be used to set the stabilizer ratio. [https://www.mcmaster.com/pulleys This is an off-shelf item.]
| |
| ##[https://www.youtube.com/watch?v=O4h-Me5lSOY Example of variable speed pulley system.] If we use the same auger size for soil and stabilizer, then gear reduce the stabillizer auger to give 3% to 10% the speed of the soil auger. If you need more than 10% stabilizer then you are using a very low clay content soil and using a ton of cement - rethink the soil blend and if you need to, buy a different pulley.
| |
| ##Does variable pulley work at low speeds?
| |
| ###[[Planetary Geardown]]? 6 axis CNC Torch Table to produce most components of planetary geardown?
| |
| | |
| =July 16, 2019=
| |
| Tried to go to the dev meeting to discuss soil mixer per discussion with Marcin last week but nobody was there save an AFK Abe.
| |
| | |
| Need feedback on workshop tools and infrastructure list at [[Belize CEB]]. I'm not including any hardware or materials for the house - just the tools that are required to build it. Just working from what I can imagine would be necessary. Another more experienced set of eyes would be good to glance over what I have listed so far.
| |
| | |
| Thinking about soil prep: for Marcin's hammermill concept, how do we get dirt at OMC (optimum moisture content) before it goes into the hammermill? One way could be to figure out OMC by volume of dry dirt, volume of water and have laborers fill 5 gallon buckets with dry, screened dirt and add water from another bucket with demarcated OMC line. This unmixed bucket of water and dirt goes in to hammermill. Assume that the dirt has (non-uniformly) absorbed the water AND that the hammermill will actually give a homogeneous mix. I don't see why the hammermill would give a homogenous mix unless you cap the mixing chamber to prevent material escaping before a homogeneous mix is obtained. This would take longer than a press cycle so it would have to mix more than 1 block's worth per round.
| |
| | |
| =July 11, 2019=
| |
| [[Mader's Machine]]
| |
| | |
| =July 5, 2019=
| |
| CADded [[2" Universal Axis|D3D Mill assembly]] in 2 days
| |
| | |
| =June 20, 2019=
| |
| <html><iframe width="560" height="315" src="https://www.youtube.com/embed/FJvYA0GuFOc" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
| |
| | |
| =June 16, 2019=
| |
| [[File:Taper_to_Straight_adapter.fcstd]] [[File:Taper_to_Straight_Adapter_Wheel_Hub.fcstd]]<br/>
| |
| <html><iframe width="1000" height="600" src="https://scrumy.com/FeF_STEAM" frameborder="0" allowfullscreen></iframe></html>
| |
| | |
| =Feb 25, 2019=
| |
| I made a new tube builder when I heard mine wasn't working in FreeCad 0.16 on Ubuntu.<br/>
| |
| The new file is based on the Sketcher, Draft, and Part workbenches whereas the original file was based on the Sketcher and Part Design workbenches.
| |
| | |
| [[File:Alternative_Universal_Tube_Builder.fcstd]]
| |
| | |
| Here is a video explaining the new file approach
| |
| <br/>
| |
| <html><iframe width="560" height="315" src="https://www.youtube.com/embed/PcCe6sOE3pc" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
| |
| | |
| =Feb 23, 2019=
| |
| Video showing making of a spreadsheet parametrized cad file.<br/>
| |
| <html><iframe width="560" height="315" src="https://www.youtube.com/embed/camIgIfUjss" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
| |
| | |
| =Feb 22, 2019=
| |
| Made a video about the tube generator and improved the file by adding HoleSpacing parameter to spreadsheet.
| |
| <html><iframe width="560" height="315" src="https://www.youtube.com/embed/HKxSg1iWeLU" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
| |
| | |
| =Nov 20, 2018=
| |
| | |
| Here is a version uploaded to the OSE Wiki. It should work but may have design flaws. I'm using an O-ring to seal the cylinder in the cap trepan groove. This is questionable.
| |
| <br/>
| |
| [[File:Universal_Cylinder_Builder_ADW.FCStd]]
| |
| <br/>
| |
| <html><iframe width="560" height="315" src="https://www.youtube.com/embed/VoLDv17Tq7o" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe><iframe width="560" height="315" src="https://www.youtube.com/embed/n_ZFx_YQh7w" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
| |
| -----
| |
| I've been working on a cad file for the [[CEB_Cylinder|Open Source Cylinder]]. Here is a link to the alpha stage of the file. [https://www.dropbox.com/s/npj8me9f7l0znqp/Universal%20Cylinder%20alpha.FCStd?dl=0 DROPBOX] The end-caps are square with a trepan machined for the tube to seat. The caps could potentially be parted so that a welding operation replaces a machining operation for the tube seat. The Rod is welded to the Piston in my version.
| |
| | |
| Like the universal tube builder, I'm trying to make it parameterized from a spreadsheet. Here is what the parameters look like right now:
| |
| | |
| Name Input (Inches) Output (mm) Note
| |
| Cap Side Length 4 50.8
| |
| Cap Thickness 1 25.4
| |
| Tube OD 3 38.1
| |
| Tube Wall Thickness 0.25 6.35
| |
| Piston Thickness 1 25.4
| |
| Piston Seal Inner, Height 0.3125 7.9375
| |
| Piston Seal Inner, ID 2.125 26.9875
| |
| Piston Seal Inner, OD 2.5 31.75
| |
| Piston Seal Outer, Height 0.25 6.35
| |
| Piston Seal Outer, ID 2.125 26.9875
| |
| Piston Seal Outer, OD 2.5 31.75
| |
| Stroke 12 304.8
| |
| Rod OD 1.5 19.05
| |
| Rod Stickout 2.5 63.5
| |
| Cap Seal Outer, Height 0.25 6.35
| |
| Cap Seal Outer, OD 2 25.4
| |
| Cap Seal Outer, ID 1.495 18.9865
| |
| Cap Seal Inner, Height 0.25 6.35
| |
| Cap Seal Inner, OD 2 25.4
| |
| Cap Seal Inner, ID 1.495 18.9865
| |
| | |
| Need to add a few parameters like tie-rod diameter. I think the model may need to be scrapped. Especially if one looks at the dependency graph lol. I didn't take as intentional an approach to modeling it as I could have.
| |
| | |
| I believe it is a worthwhile effort, though. A user could generate the CAD for a cylinder of different sizes by simply entering data into a spreadsheet.
| |
| | |
| <br/><html><img src="https://www.dropbox.com/s/5fs1vqief8zlzar/1111%25200020%2520-%252012393%2520w%2520-%2520EN_tcm_12-146081.png?dl=1"></img></html><br/>[[File:UCB_Alpha.png|750px|Left]]
| |
| | |
| ==Notes==
| |
| The caps as I have drawn can be easily made on a lathe and mill.
| |
| How i would make this:
| |
| Cut the plate to size and machine square. Surface grind for extra credit. Put the four tie rod holes in but make them half inch reams. Using shoulder bolts, attach the plate to a lathe jig or 2 bolts and 2 dowel pins. To make the lathe jig, press fit a piece of 4" or similar crs into a thick plate with the bolt pattern on it and weld. Face the jig on the lathe after welding. The bolt pattern should be put in after the welding operation. Use custom vise jaws and maybe a small bore for picking up the center. For the rod end cap, drill and bore the rod hole then bore internal grooves. Then cut trepan groove. For the base, it's just a trepan.
| |
| Make those in half a day including making the jig.
| |
| | |
| As an alternative, I was imagining "slicing" the caps into layers, like 3d printing, and then welding the slices together.
| |
| | |
| For plastic cylinders, I would start with pvc or abs pipe as the tube. I'd go down that road before I started messing with a metal prototype.
| |
| | |
| I'll keep thinking about it.
| |
|
| |
|
| | || <html><iframe width="600" height="500" src="https://osedev.org/wiki/Aidan?start=9/1/2019"></iframe></html> |
| | |} |
|
| |
|
| Aidan
| |
|
| |
|
| =Nov 5, 2018= | | =December 12, 2022= |
| Here is a file that might be helpful for y'all. Open the Universal Tube Builder file and use the spreadsheet to create tubing with all dimensions parametrized. Holes will automatically be set to 4" spacing. I can change that if you want. You can define the standoff for the first hole.
| | All the exterior module [[seh4cad|Cheatsheets]] I've been uploading are looking at the module from the exterior of the building which may be confusing when it's time to install electrical boxes. Probably will just stick with the scheme for the first floor and start drawing the cheatsheets from the interior for the 2nd floor. |
|
| |
|
| [[File:Universal_Tube_Builder_ADW.FCstd]] | | =July 20, 2021= |
| | [[Hydraulic DCV Comparison]] |
|
| |
|
| [https://www.freecadweb.org/wiki/Expressions FreeCAD expressions for constraint solver] | | Scalable CEB Circuit. Up to 3 PowerCubes with hydraforce part. GPM numbers assume 30gpm pump. Pump can be replaced with intake manifold. Scale to 3 powercubes input. Quick disconnect one and put it on tractor. Put it back. etc. |
| | |
| | [[File:CEB_Prince_400.png|400px]] |
|
| |
|
| [[Category:Logs]] | | [[Category:Logs]] |
