Revision as of 03:05, 11 April 2017

5/16" or 8 mm Rod Version

Small version for small machines such as 3D printer, small laser cutter, and CNC circuit mill

D3dframe freecad.jpg

Frame - FreeCAD -File:D3dframe.fcstd. STL - not 3d printer. Another version will be 3D printed.
Motor Side of Axis - FreeCAD -File:Universal axis motor side.fcstd. STL - File:Universal axis motor side.stl
Carriage Side - FreeCAD - File:Universal Axis Idler Side short version.fcstd. STL - File:Universal axis carriage side.stl
Right Y Axis - FreeCAD - File:D3D Right Y Axis.fcstd.
Short Idler Side - FreeCAD - File:Universal axis carriage side.fcstd.
Idler Side Axis Full Size - FreeCAD - File:Idler side printed axis half freecad.fcstd.
Axis Hex Bolt - FreeCAD - File:Axis hex bolt freecad.fcstd.
Axis Hex Nut - FreeCAD - File:Axis hex nut freecad.fcstd.
Magnet - FreeCAD - File:Neodymium magnet freecad.fcstd. Magnets should be 12x3 mm, this one appears to be 10 mm.
Idler Side Bearing - FreeCAD - File:Idler side bearing freecad.fcstd.
Carriage Linear Bearing - FreeCAD - File:Carriage linear bearing freecad.fcstd.
Nema 17 Stepper Motor - FreeCAD - File:Nema 17 stepper motor freecad.fcstd.
X Axis Belt - FreeCAD - File:8mm belt x axis freecad.fcstd.
Previewfilename.jpg

Part name - FreeCAD - File:Freecadfilename.fcstd.

Motor Side, short - File:Universal Axis Motor Side short version.fcstd.
20 Tooth Timing Pulley - FreeCAD - File:20 tooth pulley freecad.fcstd. This is an extruder driver gear, not 20 tooth pulley. See D3D BOM 2 Week BOM for the correct part.

@@ Line 25: / Line 25: @@
 File:Axis hex nut.jpeg|'''Axis Hex Nut''' - FreeCAD - [[File:Axis hex nut freecad.fcstd]].
-File:Neodymium magnet.jpeg|'''Magnet''' - FreeCAD - [[File:Neodymium magnet freecad.fcstd]].
+File:Neodymium magnet.jpeg|'''Magnet''' - FreeCAD - [[File:Neodymium magnet freecad.fcstd]]. '''Magnets should be 12x3 mm, this one appears to be 10 mm.'''
 File:Idler side bearing.jpeg|'''Idler Side Bearing''' - FreeCAD - [[File:Idler side bearing freecad.fcstd]].