File:Universal axis motor side.stl

From Open Source Ecology
Jump to: navigation, search
Universal_axis_motor_side.stl(file size: 170 KB, MIME type: application/sla)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Notes

  • 16:34, 11 September 2018 - version lying flat
  • Increased hole diameter from .24" to .26". Depth is the same.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current20:53, 17 May 2019 (170 KB)Marcin (talk | contribs)Motor piece standing up.
21:34, 11 September 2018 (170 KB)Marcin (talk | contribs)Reverted to version as of 21:22, 6 April 2017 (UTC)
03:20, 10 August 2017 (679 KB)Marcin (talk | contribs)4 carriages nested
21:22, 6 April 2017 (170 KB)Marcin (talk | contribs)New print file with 2 added magnet holes.
14:46, 5 April 2017 (153 KB)Marcin (talk | contribs)Flipped file for correct orientation on print bed.
14:43, 5 April 2017 (153 KB)Marcin (talk | contribs)Version corrected for the more shallow motor-mounting holes so washers don't need to be used.
16:08, 18 February 2017 (151 KB)Marcin (talk | contribs)Increased hole diameter from .24" to .26". Depth is the same.
  • You cannot overwrite this file.