D3D Part Library: Difference between revisions
| Line 17: | Line 17: | ||
File:OSE-D3D-printer-infographic-v1-3b.jpg|'''Short Idler Side''' - FreeCAD - [[File:Universal_axis_carriage_side.fcstd]]. | File:OSE-D3D-printer-infographic-v1-3b.jpg|'''Short Idler Side''' - FreeCAD - [[File:Universal_axis_carriage_side.fcstd]]. | ||
File:Idler side printed axis half.jpeg|'''Idler Side Axis Full Size''' - FreeCAD - [[File:Idler side printed axis half freecad.fcstd]]. | File:Idler side printed axis half.jpeg|'''Idler Side Axis Full Size''' - FreeCAD - [[File:Idler side printed axis half freecad.fcstd]]. '''This probably needs to be converted to the file from Manolis Log with a version history?''' | ||
File:Axis hex bolt.jpeg|'''Axis Hex Bolt''' - FreeCAD - [[File:Axis hex bolt freecad.fcstd]]. '''This is too shorot, needs to be M25x5 bolt''' | File:Axis hex bolt.jpeg|'''Axis Hex Bolt''' - FreeCAD - [[File:Axis hex bolt freecad.fcstd]]. '''This is too shorot, needs to be M25x5 bolt''' | ||
Revision as of 03:30, 11 April 2017
5/16" or 8 mm Rod Version
Small version for small machines such as 3D printer, small laser cutter, and CNC circuit mill
- D3dframe freecad.jpg
Frame - FreeCAD -File:D3dframe.fcstd. STL - not 3d printer. Another version will be 3D printed.
Motor Side of Axis - FreeCAD -File:Universal axis motor side.fcstd. STL - File:Universal axis motor side.stl
Carriage Side - FreeCAD - File:Universal Axis Idler Side short version.fcstd. STL - File:Universal axis carriage side.stl
Right Y Axis - FreeCAD - File:D3D Right Y Axis.fcstd.
Short Idler Side - FreeCAD - File:Universal axis carriage side.fcstd.
Idler Side Axis Full Size - FreeCAD - File:Idler side printed axis half freecad.fcstd. This probably needs to be converted to the file from Manolis Log with a version history?
Axis Hex Bolt - FreeCAD - File:Axis hex bolt freecad.fcstd. This is too shorot, needs to be M25x5 bolt
Axis Hex Nut - FreeCAD - File:Axis hex nut freecad.fcstd.
Magnet - FreeCAD - File:Neodymium magnet freecad.fcstd. Magnets should be 12x3 mm, this one appears to be 10 mm.
Idler Side Bearing - FreeCAD - File:Idler side bearing freecad.fcstd.
Carriage Linear Bearing - FreeCAD - File:Carriage linear bearing freecad.fcstd.
Nema 17 Stepper Motor - FreeCAD - File:Nema 17 stepper motor freecad.fcstd.
X Axis Belt - FreeCAD - File:8mm belt x axis freecad.fcstd. Belt needs to be 6 mm wide, 2mm pitch (GT2 belt)
- Previewfilename.jpg
Part name - FreeCAD - File:Freecadfilename.fcstd.
Deprecated
Motor Side, short - File:Universal Axis Motor Side short version.fcstd.
20 Tooth Timing Pulley - FreeCAD - File:20 tooth pulley freecad.fcstd. This is an extruder driver gear, not 20 tooth pulley. See D3D BOM 2 Week BOM for the correct part.
Bigger Pictures
