Latest revision as of 17:50, 9 June 2018

Basics

Light Curable (Usually UV) Resin
Used in SLA 3D Printing
Industry Average Cost is ~$136.85/L (Exact (unrounded) average is $136.8472(repeating)/L (or in words one hundread and thirty-six and eight thousand four hundread seventy two with only the two being repeating-ten thousandths dollars per liter) This was determined (on 6/9/18 by averaging the averages acheived in the Formlabs and Peopoly Subsections of the Available Resins Section.)

Main Page for Peopoly's Resins
Average Cost: ~$74.4(4repeating), Lowest Cost $70/L, Highest Cost: $75/L (Math Used: 9 Total Resin Types, With a Total Cost of $670 ; $670/$9 = 74.4(4repeating), (or in words seventy four point four repeating), (Math Done on 6/9/18))

Main Page For Formlabs' Resins
Average Cost: ~$199.25/L, Lowest Cost: $149/L, Highest Cost: $399/L (Math Used: 16 total resin types with a total cost of $3188 ; $3188/$16 = $199.25 (Math Done on 6/9/18))

@@ Line 2: / Line 2: @@
 *Light Curable (Usually UV) Resin
 *Used in [[SLA 3D Printing]]
+*Industry Average Cost is ~$136.85/L (Exact (unrounded) average is $136.8472(repeating)/L (or in words one hundread and thirty-six and eight thousand four hundread seventy two with only the two being repeating-ten thousandths dollars per liter) This was determined (on 6/9/18 by averaging the averages acheived in the Formlabs and Peopoly Subsections of the Available Resins Section.)
 =Available Resins=
@@ Line 14: / Line 15: @@
 ==Carbon 3D==
 *[https://www.carbon3d.com/materials/ Carbon 3D's Main Site for Resins]
-*Pricing Info Unavailable without inquiry
+*Pricing Info Unavailable without inquiry (As of 6/9/18)
 =See Also=