Revision as of 05:51, 23 December 2018

Picture from London, Ontario

Adding a print cooling fan. Use these part libraries

Fan duct for OSE extruder. Download - File:Fanduct.fcstd. STL - File:Fanduct.stl
Fan holder for OSE extruder. Download - File:Fanholder.fcstd. STL - File:Fanholder.stl
Extruder mount carriage. - FreeCAD - File:Extruder mount carriage.fcstd. STL - File:Extruder mount carriage.stl. Note: FreeCAD file - make sure to select addition component so STL is filled in, and not corrupt, when going from FreeCAD to STL. 3D printed parts only - File:3D Printer Extruder.fcstd
8 mm sensor. Download - File:8mmsensor.fcstd
[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl Issue: when motor gets hot, this gets loose.
File:5015blower.fcstd 5015 Blower
File:Nema17face.fcstd Nema 17 Faceplate sketch
File:Titanaeromarcin.fcstd Marcin's Titan Aero sensor holder. STL - File:Titanaeromarcin.stl.
File:Fanwithholderpattern.fcstd Fan mount for a print cooling fan
Titan Aero with blower. Download in FreeCAD format - [1]
[2] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.
Extruder bottom mount by Polemidis - File:D3D Mini Sub-Assembly Extruder Bottom Mount.fcstd
Extruder bottom mount by Jose Urra - File:X Universal Axis Motor Interface Horizontal Position Motor Bottom Version.FCStd and File:Extruder Holder April 14.FCStd
Extruder bottom holder derivative by Marcin. Download - File:Bottomholder.fcstd

Underslung Extruder [3].
Stock Titan Aero mount bracket. See [4]. Bracket - [5] - STEP + STL. Check out drawings from E3D - [6]. STEP of Bracket - File:Bracket.fcstd
Titan Aero with motor - [7]
Titan Aero mount top plate. File:Brackettop.fcstd.
Simplified carriage: File:Universal axis carriage side.fcstd. (From D3D Part Library)
Sensor holder. File:Sensholder.fcstd.
Lulzbotmini2shroud.png

Sensor holder. File:Lulzbotmini1shroud.fcstd.

Revision as of 05:50, 23 December 2018 (view source) Marcin (talk \| contribs) (→‎Underslung Extruder v18.12) ← Older edit		Revision as of 05:51, 23 December 2018 (view source) Marcin (talk \| contribs) (→‎Underslung Extruder v18.12) Newer edit →
Line 55:		Line 55:
	File:sensholder.png\|Sensor holder. [[File:sensholder.fcstd]].		File:sensholder.png\|Sensor holder. [[File:sensholder.fcstd]].

	File:lulzbotmini2shroud.png\|Sensor holder. [[File:~~sensholder~~.fcstd]]. ~~[[File:lulzbotmini2shroud.png]]~~		File:lulzbotmini2shroud.png\|Sensor holder. [[File:lulzbotmini1shroud.fcstd]].