Simple 3D Printer Extruder

Hint: This is a simple and basic low cost extruder for 1.75 mm filament that can be built from scratch. This is not necessarity optimized for rubber, and will not work with 3 mm filament in its basic form. This is an entry level extruder that can produce reliable prints, but is limited in filament size, will have slower rubber extrusion. Rubber Extruder is a 3mm extruder optimized for rubber, and also optimized for all other filaments.

Working Doc

edit

CAD

Turn this to a gallery:

https://drive.google.com/drive/folders/1-2ASyEawm84AMfz3_cA3HgT0HBIJbDA6

• Hotblock.png

  Extruder Hot Block - size:nullkb - FreeCAD -File:Hotblock.fcstd

• Baseblock.png

  Extruder Base Block - size:nullkb - FreeCAD -File:Baseblock.fcstd

• Hotendthroat.png

  Extruder Filament throat and Heat Break - size:nullkb - FreeCAD -File:Hotendthroat.fcstd

• Nozzle.png

  Nozzle - size:nullkb - FreeCAD -File:Nozzle.fcstd

• Simpleextruderspring.png

  Spring - size:nullkb - FreeCAD -File:Simpleextruderspring.fcstd

• Filamentfeedarm.png

  Sprung Filament Feed Arm Bracket - FreeCAD -File:Filamentfeedarm.fcstd. STL - File:Filamentfeedarm.stl

• Springbasebracket.png

  Spring Base Bracket - FreeCAD -File:Springbasebracket.fcstd. STL - File:Springbasebracket.stl

Reverse Engineering Pictures

Turn this to a gallery:

https://drive.google.com/drive/folders/1-2ASyEawm84AMfz3_cA3HgT0HBIJbDA6

Links

• Low cost 3D printer BOM - Simple 3D Printer BOM