CEB Press Build Instructions

This page will hold the final version of the Build Instructions after the wiki reorganization. This is a list of pages that might hold relevant info. These need to be consolidated here: --Conor 10:00, 20 February 2011 (PST)

• CEB Fabrication
• CEB Automation Prototype II
• Arduino Control of CEB Prototype 2
• FeF Liberator Fabrication
• Grate Shaker
• CEB Press 2
• CEB Automation Prototype II
• The Liberator Assembly
• The Liberator Full Release - Mechanical Fabrication

Piece Fabrication Guides

1. Arms - primary
2. Arms - secondary
3. Controller box and cord
4. Feet
5. Frame with main cylinder
6. Grate mounts
7. Hopper sheet metal
8. Hopper mounting plate
9. Hopper supports
10. Hose Unit - Secondary cylinder Unit
11. Hoses - Shaker and main cylinder
12. Hoses - Main hose unit
13. Legs
14. Roller guides
15. Secondary cylinder
16. Secondary cylinder sensor unit
17. Sensor - Main cylinder
18. Sensor - Secondary cylinder
19. Sensor - Soil
20. Soil grate
21. Soil loading drawer
22. Soil Shaker motor unit
23. Soil Shaker
24. Solenoid valve

Firmware

• CEB Control Source Code v1.01 Annotated
• CEB Control Source Code v1.01
• CEB Control Source Code v1.0