Rammed Earth

Rammed earth buildings at Escuela de Artes Visuales de Oaxaca, Oaxaca, México.

(A) Picture showing manual ramming of earth in metallic shutters. This technique is quite labor intensive (photo taken in Sinai, Egypt). (B) Pneumatic tamper.

Basics

• Rammed Earth is an ancient building method that has seen a revival in recent years
• It produces noncombustible, thermally massive, strong, and durable buildings
• However, walls can be labour-intensive to construct without machinery (powered tampers)
• Structures are susceptible to water damage if not adequately protected or maintained.
• Building a rammed-earth wall involves compressing a damp mixture of earth that has suitable proportions of sand, gravel and clay (sometimes with an added stabilizer (like with Stabalized CEBs ) into an externally supported frame or mould. The construction of an entire wall begins with a temporary frame, or formwork, similar to concrete
• Essentially :
  • CEB is to Bricks/Concrete Blocks as
  • Rammed Earth is to Concrete

Open Source Hardware Needs

• powered (pneumatic) tamper; this may require an air compressor
• temporary frame, i.e. formwork (usually wood, plywood, steel)
• equipment for excavating subsoil, e.g. backhoe

Internal Links

• Lime may be used as a stabilizer, and in fact historically a lot of rammed earth construction has used lime
• Lime plaster as an external covering for protection
• Earthco Megablock - not actually rammed earth but a somewhat related technique
• Reinforcement: hemp fibers, bamboo, steel, perhaps basalt fibers (unclear if this has been tried, but should work well)
• with proper subsoil composition, the principles of geopolymers may be applied

External Links

• Rammed earth
• Nice overview - [1]
• A Page on this by " Semmes & Co. Builders, Inc"