Revision as of 01:28, 15 March 2013

OSE Technology Pattern Language

White paper forthcoming.

10 minute design rational for Gear Module, discussion with Rahul Dhinakaran

(needs transcription)

Uses exising Quick Connect Wheel rotor - its shaft output.
Geardown module is CNC cut from 1/2" steel sheet
Notches are made such that the structure can be assembled only one way
Mechanism for quick disassembly is included
Mechanism for tensioning the chain drive is included
Enclosure allows easy replacement of parts
Quick attachment of wheel is possible
Wheel attaches via a large key
Input shaft is 1-7/8" thick, output shaft is 3" thick
Standard cold rolled shaft is used
Mechanism for retaining axial thrust is included
Geometry must line up for the connection to Quick Attach Wheel
Guards protect any exposed chains/sprockets for safety
Method of coupling to existing Quick Connect Wheel must be used - via chain drive - while considering geometry of frame a drive components
Quick Connect Wheel and Geardown units must be sufficiently stable to maintain chain tension. Tightening mechanism must lock in place.
Reference must be provided to verify existence of off-shelf parts

@@ Line 33: / Line 33: @@
 *Method of coupling to existing Quick Connect Wheel must be used - via chain drive - while considering geometry of frame a drive components
 *Quick Connect Wheel and Geardown units must be sufficiently stable to maintain chain tension. Tightening mechanism must lock in place.
+*Reference must be provided to verify existence of off-shelf parts
 =LifeTrac Existing Design=