Samthetechie log

see Work Log for howto.

Sat, May 25, 2013

• Wrote a quick guide for Sketchup_on_Linux
• Note: quick way to grab all the .skp files that have been uploaded onto the wiki.

Go to Special:ListFiles&limit=500&ilsearch=.skp and then using the down them all plugin for firefox and 'fast filtering' with /(.skp)$/

• Some notes on edge alignment in sketchup that I found useful today:

 "A second method for ensuring your edges are aligned to axes is to temporarily change the colors of your 
 edges to reflect their alignment to one of the axis. To change edge colors to reflect axes colors."

• Reviewing recent wiki changes and latest pages relating to the Backhoe:
  • OSE-OSHW-Dev-Backhoe
  • Brian_Log
  • Marcin_Log
  • Backhoe_Boom_in_Sketchup was last updated on 06:19, 18 May 2013‎ by User:Marcin so it is out of date.
  • Backhoe Prior Art - Marcin
  • Backhoe_Stick_and_Boom_Concept_Specification#Response - points 1-3 of this response were addressed by editing the components, points 4-6 can be addressed by creating models sub-assemblies and assemblies today.
  • Backhoe_Development_Brief - looks like a todo list for today
  • Backhoe_Pivot_Module_Academy - new page, no content yet.

Tues, May 21, 2013

Input

• File:Stock Pivot Plate.skp
• Feedback from User:Marcin about File:Backhoe.skp

To generate a CAM file for 3D printing, one must consider the 3" tubing and print out a 3" hole, not a 4.875" hole and ensure hole is correct for 3d printed files.

• New pivot plate File:Stock Pivot Plate 3 inch hole.skp should address feedback from User:Marcin about the 3" pivot hole?

Is the spacing / layout ok? If so I will update the rest of the models accordingly.

Note: the above is used to generate a CAM file for 3D printing, one must consider the 3" tubing and print out a 3" hole

Ouput

• Updated File:Backhoe.skp with new 'mouse ear' Stock_Pivot_Plate
• File:12 foot stock 4 inch square tube with half inch walls.skp
  • 
• File:11 foot stock 4 inch square tube with half inch walls.skp
• File:10 foot stock 4 inch square tube with half inch walls.skp
• File:9 foot stock 4 inch square tube with half inch walls.skp
• File:8 foot stock 4 inch square tube with half inch walls.skp
• File:7 foot stock 4 inch square tube with half inch walls.skp
• File:6 foot stock 4 inch square tube with half inch walls.skp
• File:5 foot stock 4 inch square tube with half inch walls.skp
• File:4 foot stock 4 inch square tube with half inch walls.skp
• File:3 foot stock 4 inch square tube with half inch walls.skp
• File:2 foot stock 4 inch square tube with half inch walls.skp
• File:1 foot stock 4 inch square tube with half inch walls.skp

Sat, May 18, 2013

• Progress on 18th: Working on sketchup models for OSE-OSHW-Dev-Backhoe

Input

• • explanation and orientation from marcin about the Backhoe.
  • shown key documents/resources:
    • Backhoe dev page: OSE-OSHW-Dev-Backhoe
    • Backhoe sketchup models in a zip file: Backhoe_Boom_in_Sketchup (my starting point for the day in terms of sketchup source files).
    • Backhoe Prior Art

Output

• File:Stock Pivot Plate.skp

• File:Stock Bonding Plate 8 inches x 16 inches.skp
• File:Stock Spacer Plate 8 inches x 8 inches.skp
• File:Backhoe.skp
  • note 5/21/13 - needs updating to mickey mouse. DONE see new upload to File:Backhoe.skp (note the 4.875" pivot hole is still present)

• • note 5/21/13 - then to 3" pivot hole for rapid prototyping / 3d printing rather than 4.875" as per explanation on Stock_Pivot_Plate