D3D CNC Torch Table

Hint: See CNC Torch Table Log for build log - pictures from FB posts.

Basics

• A CNC Torch Table that uses a sightly modified version of the D3D Universal Axis
• Can use a gas fuel only torch, a gas fuel-pressurized air torch, a gas fuel-pure pressurized oxygen torch, or a plasma torch

Used For

• Automation of torching/cutting of large parts such as gears for treads

Version 2 Infographic

Electronic System

Diagram

edit

Height Controller by Oliver Schluter

• See CNC Torch Table Z Height Control

D3D CNC Torch Table Build Instructions

edit

Version 3 Working Doc

October 2017

edit

August 2017

edit

CAD

Started August 2017 - Part Library

• See CNC Torch Table v17.08

June 2017

• Assembly - File:CNC Torch Table Assembly.fcstd almost complete.

• Axis - File:D3D Universal Axis 1 inch.fcstd

CNC Torch Table Height Controller

See CNC_Torch_Table_Height_Controller

BOM

Hardware

• Manual height control knob - [1]
• 1" chrome steel rod is $77 per 6' - mcmaster
• Plain 1" rod is acceptable
• Bolts:
  • M6 x 1mm x 50mm Socket Head Screw - mcmaster
  • M6 x 1mm Nut mcmaster

• Pulley - amazon
• Bushing - mcmaster

Electronics

• Boards - from Aisler - $12 - aisler.net
• Stepper Driver TB6600 - robotshop.com
• Stepper Driver RAMPS - ultimachine
• Arduino Mega - robotshop.com
• 1/4" Solenoid Air Valve - ebay

Contributors - 2016 Onwards

• Oliver Log - building on Chuck Log and Paul Log and Aidan Log with respect to AD7747 capacitive height sensor for auto height controller.
• Emmanouil Log - 2017 CAD
• Michel Log - initial 1" Universal Axis design

See Also

• CNC Torch Table v17.08 - includes Part Library
• Prototype 2 - CNC_Torch_Table_2/Research_Development#Design

Useful Links

• Related but smaller design - D3D CNC Circuit Mill
• Timing belts - [2]