Simple 3D Printer Extruder: Difference between revisions
AbeAnderson (talk | contribs) m (→CAD) |
AbeAnderson (talk | contribs) m (→CAD) |
||
| Line 29: | Line 29: | ||
File:simpleextruderspring.png|'''Spring''' - size:nullkb - FreeCAD -[[File:simpleextruderspring.fcstd]] | File:simpleextruderspring.png|'''Spring''' - size:nullkb - FreeCAD -[[File:simpleextruderspring.fcstd]] | ||
File:Simple_extruder_bearing_bracket.png|''' | File:Simple_extruder_bearing_bracket.png|'''Bearing Bracket''' - FreeCAD -[[File:simpleextruderbearingbracket.fcstd]]. STL - [[File:simpleextruderbearingbracket.stl]] | ||
File:Simple_extruder_base_bracket.png|'''Spring Base Bracket''' - FreeCAD -[[File: | File:Simple_extruder_base_bracket.png|'''Spring Base Bracket''' - FreeCAD -[[File:simpleextruderspringbasebracket.fcstd]]. STL - [[File:simpleextruderspringbasebracket.stl]] | ||
</gallery> | </gallery> | ||
Revision as of 00:19, 2 September 2019
Hint: This is a simple and basic low cost extruder for 1.75 mm filament that can be built from scratch. This is not necessarity optimized for rubber, and will not work with 3 mm filament in its basic form. This is an entry level extruder that can produce reliable prints, but is limited in filament size, will have slower rubber extrusion. Rubber Extruder is a 3mm extruder optimized for rubber, and also optimized for all other filaments.
Working Doc
Build
CAD
Turn this to a gallery:
https://drive.google.com/drive/folders/1-2ASyEawm84AMfz3_cA3HgT0HBIJbDA6
Extruder Heater Block - size:nullkb - FreeCAD -File:Heaterblock.fcstd
Extruder Base Block - size:nullkb - FreeCAD -File:Baseblock.fcstd
Extruder Filament throat and Heat Break - size:nullkb - FreeCAD -File:Heatbreak.fcstd
Nozzle - size:nullkb - FreeCAD -File:Simple extruder nozzle.fcstd
- Simpleextruderspring.png
Spring - size:nullkb - FreeCAD -File:Simpleextruderspring.fcstd
Bearing Bracket - FreeCAD -File:Simpleextruderbearingbracket.fcstd. STL - File:Simpleextruderbearingbracket.stl
Spring Base Bracket - FreeCAD -File:Simpleextruderspringbasebracket.fcstd. STL - File:Simpleextruderspringbasebracket.stl
Reverse Engineering Pictures
Turn this to a gallery:
https://drive.google.com/drive/folders/1-2ASyEawm84AMfz3_cA3HgT0HBIJbDA6
Links
- Low cost 3D printer BOM - Simple 3D Printer BOM