Revision as of 11:17, 29 December 2019

Links

@@ Line 1: / Line 1: @@
-=Basics=
-*A Line of Overbuilt [[D3D]]s
-*Maxed out Specs for the most demanding use cases
-=Basic Design=
-*This is just an idea by [[User:Eric]], feel free to change baasic design (And remove this line once we all agree on the basic design)
-*Dual Axis on all Axis (X,Y,Z)
-*Built in Octoprint via A Raspberry Pi 4
-*Built in Touchscreen
-*Option of a Toolchanger
-*Option of a Part Removal "Pusher" installed that automatically scrapes the bed and pushes the part either into a collection bin or a conveyor (only needed for print farms), may not even work (Perhaps a print belt? (Wouldn't have infinite axis, would be only for part removal, may make heatting + autoleveling harder
-*Built in (4k? 1080p?) Webcam for monitoring of parts
-*Uses the [[Open Source 3D Printer Enclosure]] with heating and fume removal (and/or filtration)
-*Insulated Heatbed, and Heated Build Chamber STANDARD
-*Hand Swappable Toolhead Stock
-*CNC (Circuit and full on CNC), Laser, Solder, Pick and Place, Lab Liquid Handler, Rotary Tool (Like a Dremel for Surface Finish etc), and Microscope toolheads available as options
-*Available in 30cm, 50cm, 1 Meter, and 10 Meter Build Area Options
-*Optional use of the [[Ball Screw Universal Axis]]
-=BOM=
-*
-=See Also=
-*[[D3D]]
-*[[D3D tool changers]]
-*[[Kinematic Coupling]]
-=Useful Links=
-*
+=Links=
+*Eric's proposal - [[Eric D3D Pro Proposal]]
 [[Category: D3D]]