D3D Universal Build Pictures and Video: Difference between revisions
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
#[1] 2x12 lumber, 12.5" long | #[1] 2x12 lumber, 12.5" long | ||
#[3] belts, 26" long | #[3] belts, 26" long | ||
=Instructions= | |||
*Make the heater block - inserting the thermistor, heater, nozzle, heat break, and nut. | |||
*'''Need to heat tighten'''. {{qc}} 1/2 mm space under the hex tip of the nozzle. | |||
* | |||
==D3D Universal Axis== | ==D3D Universal Axis== | ||
Latest revision as of 20:16, 23 July 2020
Build
Cut List
- [6] 8 mm rods, 12" each
- [1] 8 mm rod, 3D printed,
- [1] 2x12 lumber, 12.5" long
- [3] belts, 26" long
Instructions
- Make the heater block - inserting the thermistor, heater, nozzle, heat break, and nut.
- Need to heat tighten.
1/2 mm space under the hex tip of the nozzle.
D3D Universal Axis
Platform on stilts so extruder reaches bed:
Nozzle does not reach bed:
Extruder Build
Plotter Build