Steam Engine Design/Boiler: Difference between revisions
(added category.) |
No edit summary |
||
| Line 15: | Line 15: | ||
Stationary applications can probably get by with a simple style grate biomass boiler. http://www.biomasscombustion.com/horizontal_grate_technology.htm | Stationary applications can probably get by with a simple style grate biomass boiler. http://www.biomasscombustion.com/horizontal_grate_technology.htm | ||
=Flash Steam Generator= | =Flash Steam Generator= | ||
Revision as of 21:06, 1 May 2011
Main > Energy > Steam Engine
Boiler
A simple boiler implementation involves a Babington_Burner heating the inside of a 6 inch metal pipe of 1/8" wall thickness. A 100 foot long coil of 1/2 inch steel tubing is placed inside this coil, and an electronically-controlled Valve delivery system (note: in steam engine case, the 'solar boiler' in last link is replaced by the above 100-foot coil of steel tubing.
Materials
- Stainless steel tubing at McMaster Carr, $130 for 100 feet of 1/2" tubing - type 304 stainless - item number 8989K67 at http://mcmaster.com
- 200 psi pressure relief valve http://www.grainger.com/Grainger/wwg/guideBrowse.shtml $60.80.
Boiler Fuel:
For transportation vehicles some biomass fuel energy densification is required. Pyrolisis fuels without elaborate processing look promising here is a brief summary of some methods http://www.ars.usda.gov/sp2UserFiles/Program/307/biomasstoDiesel/RobertBrown&JenniferHolmgrenpresentationslides.pdf
http://www.biomasscombustion.com/horizontal_grate_technology.htm
Stationary applications can probably get by with a simple style grate biomass boiler. http://www.biomasscombustion.com/horizontal_grate_technology.htm
Flash Steam Generator
- Coil bending jig - $400
- Stainless steel coil, 150 feet - $200
- Babington fittings and metal - $100
- Dremel tool - $40
- Dremel micro drill press - $40