JET LOG

Highlights

• Initial Assessment JET
• OSE Software Stack
• HeroX Challenge Research
• Intentional Communities

August 2021

August 22, 2021

• Y axis working again after filing down heated bed carriage piece. Belt was grinding against rough edges inside.
• Thinking about printer build ergonomics
• Y end stop doesn't remain in place, need to continually readjust but works otherwise.
• Printer lowers down too far when printing and nozzle crashes into print bed. Z offset has been adjusted per Ken's recommendation but still not able to get good prints.
• Filament leaks through nozzle even when Extruder is not engaged. Possibly need to replace the nozzle.
• Will switch one Z axis rod as the other previously swapped out was too short but now this one is too long and I cannot attach Spool Holder.

July 2021

July 10, 2021

• Look into feasibility of moving into FreeCAD 19
  • Need to updated instructionals
• Standing up project management infrastructure

July 3, 2021

• HeroX Challenge Collaboration
• Business Case Study

To Do

• Look into possible media wiki extension for tracking hours log
• Send requested materials to access Dev VPN

July 2, 2021

• Began building Eco-home modules
• Design Lessons

July 1, 2021

• Began apprenticeship, clearing workshop and design lessons

June 2021

Thu Jun 24, 2021

• Filled out Apprenticeship Survey
• Updated Intentional Communities Page

Fri June 18, 2021

• Fider is up and working after learning more about Docker.
  • Need to finish setting up mail server and purging DB instance before testing.
• Shipping Tools/Equipment/QoL Items to site
• Researching viability of moving certain workloads to containerized environment
• Working on Assessment form

Thu June 10, 2021

• Built out Fider app in OOTO Cloud
  • Need to troubleshoot configuration with Docker
  • Do not use Ubuntu Snap-In's with Docker.

Wed June 2, 2021

• Fider Upvoting App Test Build

May 2021

Sat May 29, 2021

• Build Test Servers
• Discuss IT Solutions
• Completing Initial Assessment

Thu May 27, 2021

• OnlyOffice/NextCloud Integration
• Completing Apprenticeship Forms
• Creating/Completing Initial Assessment

Wed May 26, 2021

• Building/Configuring OnlyOffice Server
• Reviewing Videos/Eco-Home Build Cheatsheets

Tue May 25, 2021

• Building/Configuring NextCloud Server

Mon May 24, 2021

• Added wall module 16 to build cheatsheet

Sun May 23, 2021

• Seed Eco-Home 2 Design Sprint
• Updated OSE Software Stack

Thu May 20, 2021

• Creation of this work log
• Attended Sustainable Buildings Webinar held by LoraWAN - Need to review materials
• Familiarizing myself with wiki page
• Submission of qualification video for FreeCAD OSE Badge