Husam TAZ Testing: Difference between revisions

Revision as of 18:33, 23 May 2013

Listen to Marcin's lesson on TAZ usage.
Download Bed Leveling Gcode and test machine 1 time.
Create 1/2"x4"x4" tubing that is 4" long in Sketchup. Make sure to generate a file where print will be vertical (meaning the tube grows vertically, not horizontally)
Upload file to First GVCS Prototype 3D Print
Generate STL file.
Upload file to First GVCS Prototype 3D Print
Generate gcode file.
Upload file to First GVCS Prototype 3D Print
Create thumbnails for Sketchup, for STL file, and upload them to First GVCS Prototype 3D Print
Open gcode in Pronterface
Print!
Take a picture and upload to First GVCS Prototype 3D Print to document this. When you have done it, please get me.

@@ Line 1: / Line 1: @@
 #Listen to Marcin's lesson on [[TAZ]] usage.
 #Download [[Bed Leveling Gcode]] and test machine 1 time.
-#Create 1/2"x4"x4" tubing that is '''4" long''' in Sketchup.
+#Create 1/2"x4"x4" tubing that is '''4" long''' in Sketchup. '''Make sure to generate a file where print will be vertical (meaning the tube grows vertically, not horizontally)'''
+#Upload file to [[First GVCS Prototype 3D Print]]
 #Generate STL file.
+#Upload file to [[First GVCS Prototype 3D Print]]
 #Generate gcode file.
-#Upload these 3 files to [[First GVCS Prototype 3D Print]]
+#Upload file to [[First GVCS Prototype 3D Print]]
 #Create thumbnails for Sketchup, for STL file, and upload them to [[First GVCS Prototype 3D Print]]
-#Open in [[Pronterface]]
+#Open gcode in [[Pronterface]]
-#Generat file where print is vertical (meaning the tube grows vertically, not horizontally)
+#Print!
-#
+#Take a picture and upload to [[First GVCS Prototype 3D Print]] to document this. When you have done it, please get me.