File:CNC Torch 1in carriage.fcstd
Jump to navigation
Jump to search
CNC_Torch_1in_carriage.fcstd (file size: 92 KB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Notes
- Second to last 281 kb file is good.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| 21:37, 10 October 2017 | (165 KB) | Lex Berezhny (talk | contribs) | Increased length of long side from 5.9" to 6.0". Moved bolt holes on each end by 0.1" towards the edge. | |
| 21:29, 10 October 2017 | (165 KB) | Lex Berezhny (talk | contribs) | Changed bearing grove from 1.3" to 1.36". | |
| 00:52, 7 October 2017 | (166 KB) | Lex Berezhny (talk | contribs) | Widened belt hole from 12.70mm to 13mm. | |
| 03:37, 17 August 2017 | (167 KB) | Polemidis (talk | contribs) | Slightly increased bushing hole | |
| 03:24, 17 August 2017 | (167 KB) | Polemidis (talk | contribs) | Increased diameter of the holes so 1/4" bolts can easily pass through. Smaller belt holder pocket. It was too wide | |
| 01:51, 16 August 2017 | (167 KB) | Polemidis (talk | contribs) | adjusted to fit the Luzbot Mini | |
| 22:46, 15 August 2017 | (167 KB) | Polemidis (talk | contribs) | shaft span was wrong fixed it | |
| 19:56, 15 August 2017 | (167 KB) | Polemidis (talk | contribs) | removed material, dimensions adjustments | |
| 16:12, 15 August 2017 | (169 KB) | Polemidis (talk | contribs) | minor adjustments | |
| 15:17, 15 August 2017 | (136 KB) | Polemidis (talk | contribs) |
You cannot overwrite this file.
File usage
The following 4 pages use this file: