D3D v20.04

Specifications

• 12" heat bed
• 1400W heat bed
• Transitioning to OSE Universal Gearless Extruder
• Based on D3D Pro geometry

Working Doc

edit

Sample Part Library

• 

  D3D v19.02 Final Assembly - size:nullkb - FreeCAD -File:D3Dfinalassemblyv1902.fcstd

• 

  12" Frame - size:nullkb - FreeCAD -File:Frame1902.fcstd

• 

  Z1 axis - size:nullkb - FreeCAD -File:Z1D3Dv1902.fcstd

• 

  [10] Motor Side of Axis - 221k - FreeCAD -File:Universal axis motor side.fcstd. STL - File:Universal axis motor side.stl

• 

  Universal axis carriage: File:Universal axis carriage side.fcstd. STL - File:Universal axis carriage side.stl

Cut List

Using 3D Printer Workbench 2020:

1. X - [2] 22”
2. Y - [4] 21”
3. Z, bed, spool holder - [9] 17”

Heater Element

(See Nichrome Calculator)

Notes:

• Fiberglass sleeve used - HTG fiberglass, does not fray like standard high temperature sleeving (1000F) and is rated for . See [1]. Note that the resin can burn out at the 650C (1200F) workign temp. Sleeve has VW-1 flame resistance. Made of fiberglass, it does not burn out, but may fuse and lose fiber structure.
• Inner core: 5' long wraparound of 2mm tight braid fiberglass sleeve - 600C - [2]
• This is packed into 6' of 6 mm tight braid fiberglass sleeve.

Heater Optimization

Theoretical idea:

But, ga 18 can't bend easily using a cordless drill.

• 20 feet of 20 ga wire appears to be most convenient - 1 piece, max at 1200F. Current 500W heater is 1200F max, and works well.

• 14 feet of 24 ga works perfectly by hand to get a good wrap over 4 feet, and goes fast, about 1 minute pending tieups:

Heater Element Build Procedure

1. Cut 14' of ga 24 nichrome
2. Cut 5' of tight 2 mm fiberglass sleeve
3. start the wrap of nichrome on one end of sleeve
4. Attach other end of sleeve to a free-spinning rotor
5. Once enough to go inside a cordless drill chuck - grab the nichrome wrap and turn on the drill in reverse to start wrapping. Tension the sleeve against the rotor
6. Wrap away! A person should be able to wrap 4 feet long just by holding a corless drill