CEB instructionals CAD Requests

Please place a check () if you have placed the fab drawing on a page. You can either place a drawing on the page or email me the drawings at brianna (at) kufadesigns (dot) com and I can put them up.

Fab drawings

• Brick Holder Plate
• Controller Mount
• Dirt-keeper plate
• Valve Mount
• Arms - primary
  • We need the CAD of the drawings already there. See the page.
• Arms - secondary-Show where to weld the leg holders.
• Grate mounts-Something which shows cutaway and hole locations. May require 2 drawings or a 3d one.
• Hopper supports- Need to show hole locations, cutaway and slot at top, and where to weld the bolts on the one side.
• Hopper sheet metal
  • How to cut for both 5x10 or 4x8 sheets
  • Hinge Plates assembly
  • Exploded parts diagram of how to assemble hopper plates with hinge plates
• Hopper mounting plate-Show where to punch holes before welding, and how to weld

Sketchup Models from CAD model

• Brick Holder Plate
• Controller Mount
• Dirt-keeper plate
• Valve Mount
• Arms - primary-Need "monster" and "normal" models as they differ.
• Arms - secondary
• Grate mounts
• Hopper supports
• Hopper sheet metal