Samthetechie log
Jump to navigation
Jump to search
see Work Log for howto.
Sat, May 25, 2013
- Wrote a quick guide for Sketchup_on_Linux
- Reviewing recent wiki changes and latest pages relating to the Backhoe:
- OSE-OSHW-Dev-Backhoe
- Brian_Log
- Marcin_Log
- Backhoe_Boom_in_Sketchup was last updated on 06:19, 18 May 2013 by User:Marcin so it is out of date.
- Backhoe Prior Art - Marcin
- Backhoe_Stick_and_Boom_Concept_Specification#Response - points 1-3 of this response were addressed by editing the components, points 4-6 can be addressed by creating models sub-assemblies and assemblies today.
- Backhoe_Development_Brief - looks like a todo list for today
- Backhoe_Pivot_Module_Academy - new page, no content yet.
Tues, May 21, 2013
Input
- File:Stock Pivot Plate.skp
- Feedback from User:Marcin about File:Backhoe.skp
To generate a CAM file for 3D printing, one must consider the 3" tubing and print out a 3" hole, not a 4.875" hole and ensure hole is correct for 3d printed files.
- New pivot plate File:Stock Pivot Plate 3 inch hole.skp should address feedback from User:Marcin about the 3" pivot hole?
Is the spacing / layout ok? If so I will update the rest of the models accordingly.
Note: the above is used to generate a CAM file for 3D printing, one must consider the 3" tubing and print out a 3" hole
Ouput
- Updated File:Backhoe.skp with new 'mouse ear' Stock_Pivot_Plate
- File:12 foot stock 4 inch square tube with half inch walls.skp
- File:11 foot stock 4 inch square tube with half inch walls.skp
- File:10 foot stock 4 inch square tube with half inch walls.skp
- File:9 foot stock 4 inch square tube with half inch walls.skp
- File:8 foot stock 4 inch square tube with half inch walls.skp
- File:7 foot stock 4 inch square tube with half inch walls.skp
- File:6 foot stock 4 inch square tube with half inch walls.skp
- File:5 foot stock 4 inch square tube with half inch walls.skp
- File:4 foot stock 4 inch square tube with half inch walls.skp
- File:3 foot stock 4 inch square tube with half inch walls.skp
- File:2 foot stock 4 inch square tube with half inch walls.skp
- File:1 foot stock 4 inch square tube with half inch walls.skp
Sat, May 18, 2013
- Progress on 18th: Working on sketchup models for OSE-OSHW-Dev-Backhoe
Input
- explanation and orientation from marcin about the Backhoe.
- shown key documents/resources:
- Backhoe dev page: OSE-OSHW-Dev-Backhoe
- Backhoe sketchup models in a zip file: Backhoe_Boom_in_Sketchup (my starting point for the day in terms of sketchup source files).
- Backhoe Prior Art
Output
- File:Stock Bonding Plate 8 inches x 16 inches.skp
- File:Stock Spacer Plate 8 inches x 8 inches.skp
- File:Backhoe.skp
- note 5/21/13 - needs updating to mickey mouse. DONE see new upload to File:Backhoe.skp (note the 4.875" pivot hole is still present)
- note 5/21/13 - then to 3" pivot hole for rapid prototyping / 3d printing rather than 4.875" as per explanation on Stock_Pivot_Plate